Advertisement
Quick Links
Advertisement
Related Manuals for Ofs carolina Pearl
Summary of Contents for Ofs carolina Pearl
- Page 1 Pearl Lock Set up and functionality...
- Page 2 Pearl lock Stealth Lock is an electronic push button cabinet lock. Components: - 2 AAAA alkaline batteries - 1 offset locking cam / 1 straight locking cam - FlexaCam adapters - Collar (intended for surface mount applications) - Mounting hardware - 2 green resetting stickers Powering up: - Remove red tag, lock will be ready to use...
- Page 3 Pearl lock Programming: Pearl is easy to program and operate. - Type the user code (factory default 1234) and press (enter) to unlock or lock the cabinet - The supervisor can change operating codes, modes and restore lock settings. - Button locations, indicator lights and knob referenced in the programming instructions are shown below. NOTE: While Pearl is easy to program, we highly recommend reading the complete programming instructions prior to making any changes.
-
Page 4: Programming Mode
Pearl lock Set up and functionality Programming mode: - To enter programming mode you must know the supervisor code. The default supervisor code is 12345. - Once in programming mode, multiple changes can be made prior to exiting programming. - There is a 10 second programming time limit between each step. If Pearl times out or an error is made, programming will end and you will need to enter programming mode again. - Page 5 Pearl lock Changing the supervisor code: - To change the user code you must be in Programming Mode first. - The factory default supervisor code is 12345 (user codes must be 4 to 8 digits in length). - There is a 10 second programming time limit between each step. If Pearl times out or an error is made, programming will end and you will need to enter programming mode again.
- Page 6 Pearl lock Programming single use timeout ON/OFF WARNING: Manual Lock - Single Use Timeout ON is a feature to prevent users from occupying a shared use locker or cabinet for a prolonged period of time. Turning this feature on will disable the user code after a programmable amount of time.
- Page 7 Pearl lock Reset user code to factory default 1234 (Does not apply to single use mode) - To reset the User Code to the factory default 1234 you must be in Programming Mode first. - There is a 10 second programming time limit between each step. If Pearl times out or an error is made, programming will end and you will need to enter programming mode again.
- Page 8 Pearl lock Add user to specific memory slot - The Supervisor Code memory location is called Slot 01 and the first User Code is called Slot 02. - Any additional User Codes reside in memory slots 03-20. - To add a user code to a specific memory slot (03 -20), enter programming mode first. - User codes must be 4 to 8 digits in length and must be different from all existing codes (including Slot 01 Supervisor &...
- Page 9 Pearl lock Delete user from specifying memory slot - The Supervisor Code memory location is called Slot 01 and the first User Code is called Slot 02. - Any additional User Codes reside in memory slots 03-20. - To delete a user code to a specific memory slot (03 -20), enter programming mode first. - There is a 10 second programming time limit between each step.
- Page 10 Pearl lock Add user to specific memory slot - The Supervisor Code memory location is called Slot 01 and the first User Code is called Slot 02. - Any additional User Codes reside in memory slots 03-20. - To add a user code to a specific memory slot (03 -20), enter programming mode first. - User codes must be 4 to 8 digits in length and must be different from all existing codes (including Slot 01 Supervisor &...
- Page 11 Pearl lock Installation: Template for surface mounting This template is for surface mounting Pearl units.
Need help?
Do you have a question about the carolina Pearl and is the answer not in the manual?
Questions and answers