Advertisement
Quick Links
PRODUCT NAME: Clement Fountain
ITEM NUMBER: AO139
ASSEMBLED DIMENSIONS : 12.2"H x 26" Diameter
ASSEMBLY: 1. Thread Pump (E) power cord through hole in side of water basin. To prevent leakage be
certain rubber plug on cord is fully seated into hole. Connect Spout Assembly (A) Cord to Plug on Pump
(E). 2. Place Tube (B) onto Pump then use adapter to connect Tube to underside of Spout Assembly. 3.
Fill Basin (C) with water then submerge Pump and place Spout Assembly over water reservoir. 4. Connect
Transformer (F) and plug into a GFCI outlet or circuit. If necessary, use Shims (D) to level Basin.
(A)
1
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 10-15-2021
2
3
(B)
(C)
(E)
NO TOOLS REQUIRED
Some Parts/Components may ship pre-attached.
Ltr.
Qty.
Hardware/Components Included
1
A
1
B
1/2
C/D
E/F
1
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
LED Spout Assembly
with attached cord/plug
Tube w/adapter
Basin / Shims
Pump / Transformer
4
(F)
WARNING
Electrical Shock Hazard
Plug Pump into a GFCI Outlet or Circuit
Do Not Alter Plug or Cord
IMPORTED
Page 1 of 2
Advertisement
Related Manuals for Ballard Designs AO139
Summary of Contents for Ballard Designs AO139
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Clement Fountain ITEM NUMBER: AO139 ASSEMBLED DIMENSIONS : 12.2”H x 26” Diameter NO TOOLS REQUIRED Some Parts/Components may ship pre-attached. Ltr. Qty. Hardware/Components Included LED Spout Assembly with attached cord/plug Tube w/adapter Basin / Shims Pump / Transformer ASSEMBLY: 1.
- Page 2 MAINTENANCE 1. Keep water clean. 2. Periodically clean fountain and pump to prevent mineral deposits and contamination. 3. Disconnect power and empty basin during long periods of non-use. 4. Protect from freezing. Do not use fountain in area where temperature can drop below 41 degrees.
Need help?
Do you have a question about the AO139 and is the answer not in the manual?
Questions and answers