Related Manuals for Ballard Designs Mallorca AO127
Summary of Contents for Ballard Designs Mallorca AO127
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Mallorca Fountain ITEM NUMBER: AO127 ASSEMBLED DIMENSIONS : 28 1/2”H x 19 3/4”W x 10”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 12-16-2019 Page 1 of 4...
- Page 2 NO TOOLS REQUIRED Ltr. Qty. Included Hardware -Two person assembly suggested. Remove all parts, hardware and Pump protective packaging from carton with attached power and carefully arrange on a clean, cord level, padded surface. NOTE: To avoid accidentally discarding small parts or hardware, retain all carton contents until assembly and installation are complete.
- Page 3 STEP 1: ATTACH PUMP / PULL CORD Place Fountian (C) on clean, level surface. Set Flow Control on Pump (A) to MAXIMUM (+) setting then insert Tube into top opening (Tube located in basin). Unwind, feed and pull power cord through back of Fountain.
- Page 4 MAINTENANCE 1. Keep water clean. 2. Periodically clean fountain and pump to prevent mineral deposits and contamination. 3. Disconnect power and empty basin during long periods of non-use. 4. Protect from freezing. Do not use fountain in area where temperature can drop below 41 degrees.