Hessaire H12HP1A Manual

INDOOR UNIT
Super Quiet Operation
Smart Programming
- Sleep Mode
- Louver Position
- Memory Auto Start
1) DIY
1A
Locate and attach mounting plate.
1A) Locate and drill 3" line set and cable hole.
2) DIY
2A
2A) Attach communication cable to indoor unit.
Guide cable, line sets and drain through 3" hole.
Visit us at www.hessaire.com
M I N I S P L I T A I R C O N D I TI O N E R/ H E AT P U M P
R410A Environmentally Safe Refrigerant
7 Year Compressor Warranty
15 Ft Line Set Included
Pre-Charged Compressor
INSTALLATION
3) DIY
3A
4) PRO STEP
4A
OUTDOOR UNIT
Connect exterior line sets.
3A) Route lines sets, cable and drain to condenser.
4B
4A) Connect refrigerant lines to valves.
4B) Connect main power to outdoor unit.
Connect communication cable to outdoor unit.
Vacuum test outdoor unit.