Arkon RoadVise KNRM11 Manual

KNRM11 | RoadVise
1
Install the RoadVise Ultra phone holder to the 25mm AMPS
4-hole adapter ball mount
To begin the installation, find the packaging with the 25mm
AMPS 4-hole ball adapter plate and the RoadVise phone holder,
which includes foam padding and installation hardware. Next,
attach the four mounting screws by inserting them through the
25mm AMPS 4-hole ball adapter plate and into the phone holder.
Ultra Motorcycle Phone Mount with Mirror/Pinch Bolt Adapter
®
KNRM11 Includes:
1 – Manual
1 – Phone Holder
2 – Foam Padding
4 – Screws
(M4 x 12mm)
1 – 25mm Metal AMPS 4-Hole Adapter
1 – 25mm Robust Shaft Arm
1 – 25mm Ball to 11mm Bolt Head Adapter
Important: Clean the application surface and make sure
it is free of dirt, dust, and grease before installing the
mounting hardware.
2
Assemble the components
Locate the RoadVise clamp mount, shaft arm, and
Universal Locking tablet holder. Loosen the knob to allow
the ball adapters to insert into the shaft arm by turning it
counterclockwise. Insert the ball mounts to either end of
the shaft arm and turn the knob clockwise to tighten.
USA (800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm PST
(RVKNAMPS)
(APMAMPS25MM)
(SP-RM250)
(SP25MM11)
arkon.com
Designed in USA
©Arkon Resources, Inc.
Need assistance?
Scan to email our
Arkon customer
®
service team.