Common Error Messages - Omron ZS-DSU User Manual

Error Messages and Countermeasures

■ Common error messages

Display Details
LCD screen NO MEDIA
Insufficient
Dead Battery
Setting failed
■ Error messages when the external bank function is used
Display Details
LCD screen File not found
DATA ERROR
Trans failed
■ When all digits on the displays blink
Display Details
LCD screen SYSTEM ERROR
CONNECT
SYSTEM ERROR
BANK DATA
SYSTEM ERROR
MAIN COM
■ Others
Display Details
LCD screen Disp range Error
Cause
The Memory Card is not
inserted.
There is not enough remaining
space in the Memory Card.
The backup battery for the
clock has run down.
The preset setting values are
out of range.
Cause
The specified bank file is not on
the Memory Card.
The specified bank file is in
error.
Bank file communications error
Cause
The controller is not connected.
Internal bank data in error
Internal error
Cause
The measurement result
exceeds the number of dis-
played digits.
Section6
APPENDIX
Countermeasure
Insert the Memory Card.
• Replace the Memory Card.
• Delete unwanted files saved on
the Memory Card.
• Format the Memory Card.
• Contact your OMRON represen-
tative.
• Set the values within the allow-
able setting range.
Countermeasure
Change bank file No. to an exist-
ing file name.
Select the correct bank file.
Check the connection between
the controllers.
Countermeasure
Connect the Controller.
Hold the UP key down for 3 sec-
onds, and then hold the DOWN
key down for 3 seconds.
The Data Storage Unit is turned
ON again and restored after it is
initialized.
Turn the Data Storage Unit ON
again.
Countermeasure
Change the decimal point digit
setting.
ZS-DSU
User's Manual
6-3