modway Fortitude EEI-6590 Assembly Instructions Manual page 14

TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE
Different wall materials require unique wall fasteners.
The wall plugs (AA2) and screws (AA3) are designed for xing to concrete walls only.
Please consult your local hardware store to ensure you are using the correct hardware for you wall type.
AA1 x 2
AA4
Installation Instructions :
1. Attach bracket (AA1) securely to the back top of the furniture using screw (AA4) provided. Allow 8 - 10 cm from each side.
2. Please make a hole for wall plugs position on the wall and minimum 15 mm below bracket secured to the back of unit attach the wall
plugs (AA2).
3. Locate the other bracket (AA1) on the wall over wall plugs (AA2). Place furniture into position so both brackets (AA1) are vertically in the
line.
4. Lace the end of the restrains strap through the larger hole in each bracket. Ensure the restrains strap with grids surface facing the inner
loops. Bring both ends together and slide the at end through the locking end and draw it through until all slack is removed.
5. Make sure that the strap is securely laced & locked.
Customer Service 609.256.9000 | www.modway.com
1
AA1
AA2 x 4
2
4
5
AA3 x 4
AA1
3
AA2
AA3
AA4 x 4
4
AA1
Grids Surface