Advertisement
Quick Links
Advertisement
Related Manuals for Ultraframe Glassroof
Summary of Contents for Ultraframe Glassroof
- Page 1 V4 | May 2018 LOW PITCH LEAN-TO INSTALLATION GUIDE...
- Page 2 Careful consideration should be given to the safe disposal of all starting to install the roof, please check the condition of the host packaging – Ultraframe packaging is predominantly made from wall and whether it’s plumb – depending upon what you find, recycled materials and can be readily recycled.
- Page 3 INSTALLATION (with firrings) INSTALLATION (with firrings) If firrings are supplied with steel reinforcement and need to be cut 70mm to length on site, it is essential that the 12mm retaining screws are refitted if removed (see image) Retaining Steel Screw Aluminium Notch out the top of the firring as shown to Offer the wallplate up to the wall and position it...
- Page 4 INSTALLATION (with firrings) INSTALLATION USING RAKED FRAMES Push fit the internal fascia trim into position. Attach all the glazing bars using the location Run continuous bead of sealant (appropriate for Snap off appropriate handed clip. Handing marked on Cut the PVCu wall plate top capping to the overall Fit the wall plate end caps using sealant.
- Page 5 Job No.: 2597 5/18 V4 CLTIG001 It is Ultraframe’s policy to continually seek to improve its products, processes and services, and we reserve the right to change specifications without prior notice. Ultraframe is a trading name of Ultraframe (UK) Limited.
Need help?
Do you have a question about the Glassroof and is the answer not in the manual?
Questions and answers