BC840/M/E, Compact BLE 5, Thread, Zigbee Modules
BluNor BC840 is a powerful, highly flexible, ultra low power Bluetooth Low Energy (BLE) using Nordic
nRF52840 SoC. With an ARM Cortex
embedded 2.4GHz multi-protocol transceiver, and an integrated PCB trace antenna. It
allows faster time to market with reduced development cost.
• BC840 is an ultra compact(7.1x9.2x1.5mm) and ultra short range (10 meters with an
Android phone) module for wearable application.
• BC840M is compact in size (7.1x12.3x1.5mm). Its range is measured at 135 meters for 1Mbps data rate.
• BC840E is an ultra compact (7.1x9.2x1.8mm) module with ultra long range (3400 meters at 125 Kbps, Low
Multiple Path Interference). Per FCC test reports, the peak TX power with ANT060 antenna is +15.38 dBm.
Specifications:
nRF52840 CKAA, ARM Cortex M4F, 64 MHz
ARM® TrustZone® Cryptocell-310 co-processor
Complete RF solution with integrated antenna
BLE 5 data: 2Mbps,1Mbps,500kbps,125kbps.
IEEE 802.15.4 Thread, Zigbee data: 250 Kbps
2.4 GHz proprietary data rate: 2 Mbps, 1 Mbps
DC-DC converter, inductors on board.
Direct powered by Lithium batteries or USB
supply (up to 5.5V)
32 MHz main crystal on board.
Serial Wire Debug (SWD)
Nordic SoftDevice Ready
Over-the-Air (OTA) firmware update
Flash/RAM: 1MB/256KB.
48 General purpose I/O pins
USB 2.0 full speed (12 Mbps) controller
QSPI 32 MHz interface
High speed 32 MHz SPI
Type 2 NFC-A tag with wake-on field, Touch-to-
pair support
Programmable peripheral interconnect (PPI)
12 bit/200 Ksps ADC, 8 configurable channels
with programmable gain
64 level comparator
15 level comparator with wake-up from OFF
mode
Model Summaries
module
SoC
Size, mm
BT Antenna
BT range,1 Mbps, LMPI
BT range, 1Mbps, 1.52m
BT range, 125 Kbps, LMPI.
BT range, 125 kBps, 1.52m 8 meters
BT range, 1Mbps, 1.52m,
with an Android phone
Availability
M4F MCU, available 1MB flash, 256KB RAM,
TM
BC840
BC840M
nRF52840-CKAA
nRF52840-CKAA
7.1x9.2x1.5
7.1(10.1 ant. area)x12.3x1.5 7.1x9.2x1.8
PCB trace
PCB trace
4 meters
135 meters
400 meters
12 meters
80 meters
Production
Production
Temperature sensor
4x4-channel pulse width modulator (PWM)
Audio peripherals: I2S, digital microphone
interface (PDM)
5 x 32 bit timers with counter mode
Up to 4x SPI masters/3x SPI slaves
Up to 2x I2C compatible 2-wire masters/slaves
2x UART (CTS/RTS)
Quadrature Demodulator (QDEC)
3x real time counters (RTC)
128-bit AES HW encryption
SoC Receiver Sensitivity: -96 dBm at 1Mbps
SoC TX power: programmable +8dBm to
-20dBm.
LGA, 64 pins.
Integrated PCB trace antenna
Operation voltage: 1.7V to 5.5V
Operation temperature: - 4 0 ° C t o + 8 5 ° C
Q D I D : 1 0 8 6 2 1
F C C I D : X 8 W B C 8 4 0 M
I C I C : 4 1 0 0 A - B C 8 4 0 M
C E : C e r t i f i e d
J a p a n T E L E C : 2 0 1 - 1 9 0 1 4 0
A u s t r a l i a R C M : C e r t i f i e d .
BC840E (FCC, IC)
nRF52840-CKAA
ANT060
1150 meters
850 meters
3400 meters
1400 meters
Production
1
Ver 1.04, Dec. 2021
BC840E (CE,RCM,TELEC)
nRF52840-CKAA
7.1x9.2x1.8
ANT020
Production
Need help?
Do you have a question about the BluNor BC840 and is the answer not in the manual?
Questions and answers