Page 1
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE! INSTRUCTION FOR USE OF CO-SLEEPING CRIB WITH DROP SIDE „ZEN” This product has been manufactured in accordance with the Product Safety Directive 2001/95/EU of the European Parliament and The Council and with European standards EN 1130: 2019 „Children’s furniture.
Page 2
FOLLOW ALL WARNINGS, INSTRUCTIONS AND RECCOMENDATIONS IN THIS MANUAL IN ORDER TO GUARANTEE THE SAFE USE OF THIS PRODUCT: CAUTION! WARNINGS! WARNING! DO NOT USE THIS PRODUCT WITHOUT READING THE INSTRUCTIONS FOR USE FIRST! WARNING! NEVER LEAVE THE CHILD UNATTENDED! ...
Page 3
DANGER! ALWAYS KEEP THE DROP SIDE FIXED IN ITS HIGHEST POSITION WHEN PRODUCT IS NOT FIXED NEXT TO ADULT’S BED! WARNING! WHEN USING THE PLAYPEN ALWAYS PLACE THE MATTRESS ON THE LOWEST LEVEL! The product should be placed only on a horizontal floor! Uneven surfaces may cause the product to be unstable! ...
MAIN FEATURES • This products is intended for: children aged 0 to 6 months weighing no more than 9 kg; children up to 3 years and weight up to 15 kg, when used as playpen. • “Co-sleep mode (fixing to the adult’s bed)”, that allows the parent to safely sleep close to the child; • Removable upholstery on the mattress;...
Page 5
ASSEMBLY OF PRODUCT 1. ASSEMBLY OF LOWER SUPPORT TUBES TO THE LEGS Install the lower support tubes by pressing them (6) to the corresponding openings in the legs (4), as shown in the picture. 2. INSTALLING THE CENTRAL SUPPORT BEAM and THE COT FRAME TO THE LEGS Place the central support beam (5) to the legs (4).
Page 6
8 – PARKING DEVICE Lift the lever (1), in order to unlock the wheels. Press the lever down (2), in order to activate the parking device. The cot is fixed and does not move. WARNING! THE PARKING DEVICES MUST BE ACTIVATED AT ALL TIMES WHILE THERE IS A BABY INSIDE THE PRODUCT! 9 – LOWER LEVEL (playpen) Remove the cot frame (3), as shown in the picture (See pic.2). Unzip the upholstery (Z2) and pull down the bottom.
Page 9
CARE AND MAINTENANCE GUIDELINES • Do not apply strong pressure on the mechanisms for adjusting and folding, as this may damage or brake them. • Clean the plastic and metal parts with wet soft cotton cloth or sponge and mild detergent. •...
Need help?
Do you have a question about the ZEN and is the answer not in the manual?
Questions and answers