Page 1
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE! INSTRUCTION FOR USE OF CO-SLEEPING CRIB WITH DROP SIDE „BABY BOSS” This product has been manufactured in accordance with the Product Safety Directive 2001/95/EU of the European Parliament and The Council and with European standard EN 1130: 2019 „Children’s furniture.
Page 2
FOLLOW ALL WARNINGS, INSTRUCTIONS AND RECCOMENDATIONS IN THIS MANUAL IN ORDER TO GUARANTEE THE SAFE USE OF THIS PRODUCT CAUTION! WARNINGS! • WARNING! DO NOT USE THIS PRODUCT WITHOUT READING THE INSTRUCTIONS FOR USE FIRST! • WARNING! NEVER LEAVE THE CHILD UNATTENDED! •...
• The crib must be tight against the adult’s bed and no gap is allowed between crib and the adult’s bed mattress. DO NOT use the product if you find there is a gap! Do not fill the gap with pillows, blankets or other objects. • Check if the crib is securely fixed to adult’s bed by trying to pull it away from the bed. • The product must NOT be used for more than one child at a time! •...
Page 4
INTSTRUCTIONS FOR ASSEMBLY AND FUNCTIONS CAUTION! Follow exactly the instructions given and check the pictures. CAUTION! AFTER EACH OPERATION, MAKE SURE THAT EACH FIXING IS SECURE! CAUTION! In most cases after the completion of an operation you will hear a clicking sound. CAUTION! Keep away your fingers from pinching during assembly! No tools are required to complete the assembly of this product. The assembly and functions are numbered from 1 to 9.
Page 5
FUNCTIONS 6 – „FIXING TO THE ADULT’S BED” 6-1 – Clip strap buckle to both side and bottom of the crib as shown in the picture. 6-2 – Pull the free end of the strap around the parent’s bed frame (not mattress), then close second buckle on the strap, and tighten the loop of the strap.
Page 11
CARE AND MAINTENANCE GUIDELINES • Do not apply strong pressure on the mechanisms for adjusting and folding, as this may damage or brake them. • Clean the plastic and metal parts with wet soft cotton cloth or sponge and mild detergent. •...
Need help?
Do you have a question about the Baby Boss and is the answer not in the manual?
Questions and answers