PQL 82361 Install Instructions

LED EMERGENCY LIGHT - #82361
INSTALL INSTRUCTIONS
PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION. Please read the instructions before you install and use the emergency light.
GENERAL: ALL ELECTRICAL CONNECTIONS MUST BE IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRICAL CODE (N.E.C.) STANDARDS. IF YOU ARE
UNFAMILIAR WITH PROPER ELECTRICAL WIRING CONNECTIONS OBTAIN THE SERVICES OF A QUALIFIED ELECTRICIAN.
WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS
When using electrical equipment, basic safety precautions should always be followed, including:
• Make all electrical connections in accordance with local codes, ordinances, and the National Electric Code.
• This product is for indoor use only.
• Do not mount this product near a gas or electric heater.
• Use caution when servicing batteries. Battery acid can cause burns to skin and eyes. If acid is spilled on skin or eyes, flush acid with fresh water and
contact a physician immediately.
• This product should be mounted in a location and at a height where it will not be readily subjected to tampering by unauthorized personnel.
• The use of accessories is not recommended by the manufacturer, and may cause unsafe conditions.
• Do not use this product for anything other than its intended use.
• Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
• This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• All service shall be performed by qualified service personnel. This product must be installed and maintained in accordance with the applicable
installation codes by a person familiar with the construction operation of the product and the hazards involved.
• Suitable for damp locations.
• Suitable for use in 32°F to 104°F (0°C to 40°C) ambient temperature.
• MAX. MOUNTING HEIGHT: 27FT
WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.
!
IMPORTANT: When constructing or remodeling and prior to installing, be sure to check with the local fire marshal or code enforcement office to ensure the
correct guidelines for your municipality are being followed.
TOOLS REQUIRED:
Safety
Ladder
Glasses
Wire Wire
Strippers Cutters
Before beginning assembly, installation, or operation of the product, make sure all parts are present. Compare parts with the package contents list. If any
part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer service.
PREMIUM QUALITY LIGHTING® • www.PQLighting.com
© P.Q.L., Inc. • 2285 Ward Avenue • Simi Valley, CA 93065 • 800-323-8107
Philips Flat
Screwdriver Screwdriver
3/16
"
Drill
Drill Bit
SAVE THESE INSTRUCTIONS
HARDWARE INCLUDED:
PART DESCRIPTION QUANTITY
Mounting
Screw
Wall
Anchor
Wire
Nut
Specifications subject to change without notice. Photos and line
drawings may not be to scale and are for general reference only.
2
2
3