Do you have a question about the VHD24M-0809 and is the answer not in the manual?
Questions and answers
KP
June 2, 2025
I am using a cable box using HDMI connections. Where on the TV do I plug in the cable power adapter... where is the port for this?
1 comments:
Mr. Anderson
June 2, 2025
The power adapter port location is not specifically mentioned, but the HDMI port for connecting a cable box is located on the rear panel of the Vizio TV.
This answer is automatically generated
hoothe
May 25, 2025
My VCR and TV are on, vcr is hooked up to hdmi port 2 and input is on hdmi 2 buit it does not recognize the vcr
1 comments:
Mr. Anderson
May 26, 2025
Your Vizio TV model VHD24M-0809 may not recognize the VCR connected to HDMI port 2 for the following reasons:
1. VCR Compatibility: Most VCRs do not have HDMI output. If your VCR does not support HDMI, it cannot be connected directly to the HDMI port without a converter.
2. Incorrect Input Selection: The TV input must be set to HDMI-2. Ensure you have selected the correct input source using the TV remote.
3. Cable or Converter Issue: If you are using an HDMI converter (e.g., RCA to HDMI), it may be faulty or not powered properly.
4. Port or Cable Problem: The HDMI port on the TV or the HDMI cable may be damaged or not securely connected.
5. Device Power: Both the TV and the VCR must be turned on for the connection to work.
Verify each of these steps to troubleshoot the issue.
This answer is automatically generated
Dennis
May 5, 2025
TV will not turn on. LED light near power/input button flashes continuously. Pushing power button and holding 12 seconds does not reset the TV.
1 comments:
Mr. Anderson
May 17, 2025
A Vizio TV with part number VHD24M-0809 may not turn on and show a continuously flashing LED light near the power/input button if:
1. The remote is not aimed directly at the sensor. 2. The TV is not receiving power properly. 3. The power/input button is being held down (holding for 3 seconds turns off the TV; holding for 12 seconds resets it). 4. The TV has internal damage from being dropped or exposed to heavy dust or humidity, which can cause malfunction or electric shock risk. 5. There is an issue with the power supply or internal components requiring repair.
Unplug the TV and contact a service provider if damage is suspected.
This answer is automatically generated
Debbie Rhode
April 19, 2025
How to turn on Bluetooth
1 comments:
Mr. Anderson
May 10, 2025
To turn on Bluetooth on the Vizio VHD24M-0809, pair a Bluetooth remote. Bluetooth is enabled automatically when pairing the remote. You can disable Bluetooth by unpairing the remote.
This answer is automatically generated
Michael Hero
April 4, 2025
There are no ports at all on back of tv. How do I use hdmi 1and 2?
1 comments:
Mr. Anderson
April 4, 2025
If HDMI 1 and 2 ports are not visible on the back of your Vizio TV, check the sides or bottom edge of the TV, as the port locations can vary by model. Use the appropriate HDMI cable to connect your device to either HDMI 1 or HDMI 2. Then turn on the TV and the connected device, and use the INPUT button on the remote to select the correct HDMI input.
This answer is automatically generated
Dale
January 26, 2025
Where are hdmi ports? I only see antenna
1 comments:
Mr. Anderson
February 10, 2025
The HDMI ports are located on the back of the Vizio VHD24M-0809 TV. You can look behind the TV to see where your device is connected, and there will be a name next to the port you are using.
This answer is automatically generated
Jerry Edwards
January 25, 2025
Cannot get TV to leave the home screen. Unplugging does not work. Remote does nothing.
1 comments:
Mr. Anderson
May 14, 2025
If the Vizio TV model VHD24M-0809 is stuck on the home screen and the remote is unresponsive, press and hold the POWER/INPUT button (located under the sensor) for 12 seconds to reset the TV to default settings.
This answer is automatically generated
Michael J Dickenson
May 14, 2025
I just used your service. It clearly states that I will be charged $1 for your service. My credit union balance shows that you are charging me $46! I am presently on the phone with my credit union fraud department. Not cool
Keith
February 13, 2025
How do I program my exfinity remote
Brian
January 23, 2025
Is the wall mount screw pattern 200 X 100 Screw to screw or center to center
Need help?
Do you have a question about the VHD24M-0809 and is the answer not in the manual?
Questions and answers
I am using a cable box using HDMI connections. Where on the TV do I plug in the cable power adapter... where is the port for this?
The power adapter port location is not specifically mentioned, but the HDMI port for connecting a cable box is located on the rear panel of the Vizio TV.
This answer is automatically generated
My VCR and TV are on, vcr is hooked up to hdmi port 2 and input is on hdmi 2 buit it does not recognize the vcr
Your Vizio TV model VHD24M-0809 may not recognize the VCR connected to HDMI port 2 for the following reasons:
1. VCR Compatibility: Most VCRs do not have HDMI output. If your VCR does not support HDMI, it cannot be connected directly to the HDMI port without a converter.
2. Incorrect Input Selection: The TV input must be set to HDMI-2. Ensure you have selected the correct input source using the TV remote.
3. Cable or Converter Issue: If you are using an HDMI converter (e.g., RCA to HDMI), it may be faulty or not powered properly.
4. Port or Cable Problem: The HDMI port on the TV or the HDMI cable may be damaged or not securely connected.
5. Device Power: Both the TV and the VCR must be turned on for the connection to work.
Verify each of these steps to troubleshoot the issue.
This answer is automatically generated
TV will not turn on. LED light near power/input button flashes continuously. Pushing power button and holding 12 seconds does not reset the TV.
A Vizio TV with part number VHD24M-0809 may not turn on and show a continuously flashing LED light near the power/input button if:
1. The remote is not aimed directly at the sensor.
2. The TV is not receiving power properly.
3. The power/input button is being held down (holding for 3 seconds turns off the TV; holding for 12 seconds resets it).
4. The TV has internal damage from being dropped or exposed to heavy dust or humidity, which can cause malfunction or electric shock risk.
5. There is an issue with the power supply or internal components requiring repair.
Unplug the TV and contact a service provider if damage is suspected.
This answer is automatically generated
How to turn on Bluetooth
To turn on Bluetooth on the Vizio VHD24M-0809, pair a Bluetooth remote. Bluetooth is enabled automatically when pairing the remote. You can disable Bluetooth by unpairing the remote.
This answer is automatically generated
There are no ports at all on back of tv. How do I use hdmi 1and 2?
If HDMI 1 and 2 ports are not visible on the back of your Vizio TV, check the sides or bottom edge of the TV, as the port locations can vary by model. Use the appropriate HDMI cable to connect your device to either HDMI 1 or HDMI 2. Then turn on the TV and the connected device, and use the INPUT button on the remote to select the correct HDMI input.
This answer is automatically generated
Where are hdmi ports? I only see antenna
The HDMI ports are located on the back of the Vizio VHD24M-0809 TV. You can look behind the TV to see where your device is connected, and there will be a name next to the port you are using.
This answer is automatically generated
Cannot get TV to leave the home screen. Unplugging does not work. Remote does nothing.
If the Vizio TV model VHD24M-0809 is stuck on the home screen and the remote is unresponsive, press and hold the POWER/INPUT button (located under the sensor) for 12 seconds to reset the TV to default settings.
This answer is automatically generated
I just used your service. It clearly states that I will be charged $1 for your service. My credit union balance shows that you are charging me $46! I am presently on the phone with my credit union fraud department. Not cool
How do I program my exfinity remote
Is the wall mount screw pattern 200 X 100 Screw to screw or center to center