RW nQuencer Quick Start Manual

Installation
When connecting the power cable, ensure that the red stripe
(-��v) is aligned with the text 'RED' on the module.
Always turn off power to your eurorack system and
��n faderbank when connecting or disconnecting i�c cables.
Usage
Connect nQuencer to your ��n faderbank
via i�c, give it a Clock and it will output
CV (Output �) and a Gate (Output �).
Clock In
Reset In
If a fader is at the bottom, no gate will
Output �
be output for that step.
Output �
The last fader which isn't at the bottom
determines the sequence length.
The Reset Button and Input move back to
the first step of the sequence.
Note: Functionality varies depending
on the mode and settings.
Reset Btn
The LED grid shows the current step
i�c
or current setting while in settings
mode.
Online Manual
The full manual can be found online at
random-works.co.uk/modules/nQuencer
quick start guide
rw