Changing The Password - Sharp MEMO MASTER ALARM Operation Manual

6. Changing the password
[1] Open the secret function. (Refer to page 39.)
Press [orc |[SEORET
The password will be displayed and the entire display will flash.
[3] Press| b |.
@ and the first character of the password will flash.
Enter the new password.
[5] Press [secret].
@ will stop flashing and the password will be changed.
£
If an incorrect password is used when opening
the secret function, the display will appear as | >% * XX *X* XX Xx
shown. Press and repeat the procedure | 000000000000
using the correct password.
41