Energize Lab Eilik User Manual page 31

5.1.4 Format the SD card
VERY DANGEROUS!
This method is to COMPLETELY FORMAT the SD card. All the contents of the
SD card will be ELIMINATED. Please operate with caution.
1
Use a METAL WIRE
to short circuit the
first and the second
PROTRUDING pins on
the left side of the base.
Connect Eilik into the computer. Start the
3
software to update and repair the firmware
(The process takes a relatively long time).
FORMAT
SD CARD
2
Plug a USB cable
into Eilik. There will
be a prompt of fully-
formatted SD card.
Patiently wait for the
formatting process to
complete.
29