Summary of Contents for Imperial WALL SHELL WH1900B-8
Page 1
WALL SHELL—WH1900B-8, WH1900B-K NO BLOWERS—FOR USE WITH IN-LINE OR EXTERNAL BLOWERS. Installation Instructions & Warranty Information 425 Apollo Street Brea, CA 92821 www.imperialhoods.com (800) 851-4192 DO NOT THROW AWAY, PROPERTY OF THE HOME OWNER! REV. 4.23...
Page 2
Imperial Cal Products, Inc. Read Before Starting Installation! FIRST: Check your local building and electrical codes. WARNING: To reduce the risk of fire or electrical shock, Do Not use any two speed motor units with a Solid State control devise.
Page 3
Wall Mount Installation Detail: MODELS: MODELS: WH1900B-8 WH1900B-K CAUTION: Be sure that incoming power is turned off. Position the Wall Canopy on it’s back and remove the filters. Remove the Powered Liner (C2000) assembly from the canopy shell by unscrewing the Four (4) mounting nuts with washers located at each corner of the insert.
Page 4
Imperial Cal Products, Inc. To order replace parts or schedule service please call our office at (800) 851-4192 or use our website… www.imperialhoods.com. PARTS: When ordering Parts we need the following information: Model Number (not serial number) found on UL label inside hood.
Page 5
They are to be used only in the Front Light and Center Light Panels. Your Imperial Warranty: Proof of original purchase date is needed to obtain service under warranty. Deluxe Units: Seven Year Limited Warranty, Parts and Labor.
Page 6
SAFETY INSTRUCTIONS Read and Save These Instructions Warning: To reduce the risk of fire, electrical shock or injury to persons, observe the following: A. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
Need help?
Do you have a question about the WALL SHELL WH1900B-8 and is the answer not in the manual?
Questions and answers