Subscribe to Our Youtube Channel
Related Manuals for LANG TECHNIK Makro-Grip
Summary of Contents for LANG TECHNIK Makro-Grip
- Page 1 Operating instructions Original Instructions Makro•Grip / Makro•Grip ® ® 5-Axis Vise LANG Technik GmbH Albstraße 1-6 D-73271 Holzmaden www.lang-technik.de Version 2024/02 • • • •...
- Page 2 Errors and omissions in the documentation are excepted. All rights to this documentation remain with LANG Technik GmbH. Modifications to the product: In the event of modifications to the product by the customer, the warranty is void.
-
Page 3: Table Of Contents
Contents Chapter 1 Product Description On Page General Built Scope of delivery Holding serration of the clamping jaws Version Accessories Service option Compatibility Prerequisite for mounting on a machine table Chapter 2 Technical data General data and tightening torques Clamping pressure and clamping force Zero point interface Chapter 3 Installation Attach the Makro•Grip... -
Page 4: General
Product description 1.1 General The Makro•Grip and Makro•Grip FS 5-Axis Vises are machining vises that are used in milling operations on CNC ® ® machine tools. They hold the workpiece (raw or finished part) with their clamping jaws in the center of the vise during the machining process. -
Page 5: Built
Product description 1.2 Built Base body made of case-hardened steel ① Threaded spindle including center piece ② Clamping jaws with holding serration ③ NOTE The serial number of the two clamping jaws must always be identical! Quick•Point clamping studs / integrated zero point interface ®... -
Page 6: Holding Serration Of The Clamping Jaws
Product description 1.4 Holding serration of the clamping jaws 1.4.1 Makro•Grip ® The holding teeth and depth stop alternate in the holding serration of a Makro•Grip 5-Axis Vise (see illustration). ® The distance from holding tooth to holding tooth is 6 mm. 1.4.2 Makro•Grip ®... - Page 7 Product description Makro•Grip FS 5-Axis Vise ® QTY clamping Item no. Description Jaw width Base length Spindle Spindle length Clamping range studs Makro•Grip® FS 46 48040-46 FS 46 mm 77 mm Ø 12 mm x 1,0 82 mm 0 - 65 mm micro 48065-46 FS Makro•Grip®...
-
Page 8: Accessories
Product description 1.6 Accessories Wrenches for Makro•Grip 5-Axis Vises ® Item no. 5-Axis Vise size Size 45510 External hexagon SW 8 45500 External hexagon SW 12 45501 External hexagon SW 15 45515 Allen key SW 4 45505 Allen key 77/ 125 SW 5 Hexagon socket Item no. - Page 9 Product description 1.7.3 Customer-specific clamping depth (order no. 47000-02) The standard clamping depth / support height of workpieces in the clamping jaws of Makro•Grip (FS) 5-Axis ® Vises is 3 mm. On request, this support height can be adjusted. Illustration: Left: Standard support height or clamping depth (3 mm).
-
Page 10: Compatibility
Product description 1.8 Compatibility All vise types from LANG Technik (Makro•Grip / Makro•Grip FS / Profilo / Avanti / Vario•Tec) use the same base ® ® body in different lengths and widths. This ensures that all jaw types are fully compatible with each other. Suitable jaw types can be added as required. -
Page 11: Chapter 2 Technical Data
Technical data 2.1 General data and tightening torques Base body External Max. Tightening torque Allen key size Centering accuracy [mm] width hexagon size [Nm] ±0,02 ±0,02 ±0,02 2.2 Clamping pressure and clamping force The following table shows the torque values in relation to the clamping force. Holding force [N] Torque [Nm] 2.3 Zero point interface... -
Page 12: Chapter 3 Installation
Installation 3.1 Attach the Makro•Grip (FS) 5-Axis Vise to the machine table ® Prerequisite for mounting on a machine table: The appropriate zero point clamping system is required to mount the 5-Axis Vise on a machine table. With its four (or two) mounted Quick•Point clamping studs, the 5-Axis Vise is placed in the corresponding locating holes of ®... -
Page 13: Dismantling And Turning / Inserting The Clamping Jaws
Operation 4.2 Dismantling and turning / inserting the clamping jaws NOTE The instructions for disassembling and reassembling the jaws apply to all types of vises from LANG Technik. Turning the jaws refers exclusively to Makro•Grip (FS). ® 4.2.1 Dismantling the clamping jaws Unscrew the threaded spindle anticlockwise until the clamping jaws no longer move. -
Page 14: Chapter 5 Maintenance
The load-bearing and moving parts must be checked before each use to ensure that they are in perfect condition. Damaged parts must be replaced immediately with faultless parts. In the event of damage or faults, please directly contact LANG Technik GmbH • Albstraße 1–6 • D-73271 Holzmaden • Phone: +49 7023 9585-0 5.2 Lubricant The Makro•Grip (FS) 5-Axis Vise is supplied without lubrication points. -
Page 15: Spare Parts
Spare parts may be required for the maintenance and repair of the Makro•Grip (FS) 5-Axis Vise. Information that ® you should have ready for ordering spare parts from the manufacturer LANG Technik GmbH is as follows: Minimum specification when ordering: Designation of the Makro•Grip (FS) 5-Axis Vise ®... -
Page 16: Chapter 7 Warning
8.1 Disposal in accordance with Directive (EU) 2018/851 Observe the country-specific disposal regulations when disposing of the product. LANG Technik products do not belong in household waste. Non-observance is an administrative offense. Accessories and packaging are recycled in an environmentally friendly way. -
Page 17: Chapter 9 Explanation Of Symbols
Explanation of Symbols 9.1 Symbols Please pay attention to the following warning symbols Read all the operating instructions carefully before commissioning for the first time and keep it in a safe place for future use Please read and follow the technical and safety instructions The use of protective gloves made of tough, resistant material is recommended A helmet and safety goggles are recommended for personal safety To reduce the risk of eye injuries, wearing protective goggles as specified in... - Page 18 LANG Technik GmbH Albstraße 1–6 D-73271 Holzmaden Phone: +49 7023 9585-0 Fax: +49 7023 9585-100 Website: www.lang-technik.de E-Mail (General): info@lang-technik.de E-Mail (Sales): sales@lang-technik.de...
Need help?
Do you have a question about the Makro-Grip and is the answer not in the manual?
Questions and answers