Advertisement
Quick Links
WDH-R180B Construction Dryer
Dear customer,
You have chosen a high-quality product. Here are a few tips to help you enjoy this product:
After transportation:
As the appliance works with coolant, please leave it upright for at least 1 hour before using it for the first time to allow the
coolant to settle in the appliance.
In case of any problems:
We hope that the appliance meets your expectations! Should there be any cause for complaint despite the greatest possible
care, please do not hesitate to contact us, as your satisfaction is very important to us and we would like to clear up any
misunderstandings.
During the first operation:
As the inner pipes come into contact with moisture for the first time, it can take up to approx. one hour for the first liquid to be
released, depending on the humidity.
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Advertisement
Related Manuals for Aktobis AG WDH-R180B
Summary of Contents for Aktobis AG WDH-R180B
- Page 1 As the inner pipes come into contact with moisture for the first time, it can take up to approx. one hour for the first liquid to be released, depending on the humidity. Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de...
- Page 2 ! Examples: The fan does not run during operation, the fuse has blown, there is a strange smell or the compressor rattles loudly. Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de...
- Page 3 Maintenance may only be carried out in accordance with the manufacturer's recommendations. Maintenance and repair work requiring the assistance of qualified personnel must be carried out under the supervision of the person responsible for the use of flammable refrigerants. WARNING Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 4 It is unlikely that cooling pipes or components are installed in a location where they are exposed to substances that can be corroded by components containing refrigerant. Unless the components are made of materials that are naturally resistant to corrosion or are suitably protected against corrosion. Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 5 (by shut-off valves) in a part of the system remote from the leak. Oxygen-free nitrogen must then be flushed through the system before and during the brazing process. Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 6 Recovered refrigerant may only be filled into another refrigeration system once it has been cleaned and checked. Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 7 Please note that the appliance must be set up, operated and stored in a room with a floor area of more than 12 m . Do not install the appliance in a place where flammable gas may escape. The manufacturer can provide another suitable example or provide additional information on refrigerant use. Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 8 Cover Control panel Air outlet Castors Water hose connection Pedestal Cover Insert / recess for the Filter feet to stack screen appliances on top of each other. Air intake Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 9 5 seconds in standby mode. Press the power button again (5 seconds) to switch back to the temperature display in Celsius (°C). Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 10 0 to 24 hours. After setting the timer, the indicator on the LED display lights up. If you set the timer to "00", the timer function is deactivated and the construction dryer runs in normal operation. Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de...
- Page 11 Allow the air filter screen to dry and then insert it back into its metal holder on the back of the appliance from above. DONE !!! Please disconnect the appliance from the mains (power supply) before cleaning the appliance or carrying out maintenance work ! Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 12 For this reason, we also recommend that if you use your own humidity meter (hygrometer), you place it as freely as possible and at some distance from walls and ceilings, as otherwise the humidity value determined in the room air will be falsified ! Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 13 EK1 527-12 Rev.2 CE (LVD) conformity tested according to: IEC 60335-2-40:2002+A1:2005+A2:2005 IEC 60335-1:2010 IEC 62233:2005 EMC conformity tested according to: EN IEC 55014-1:2021 EN IEC 55014-2:2021 EN 61000-3-3:2013+A1+A2 EN IEC 61000-3-2:2019+A1 Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
- Page 14 They will then recycle the appliance. We hope you enjoy using this device Keep these instructions for use in a safe place ! Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...
Need help?
Do you have a question about the WDH-R180B and is the answer not in the manual?
Questions and answers