Subscribe to Our Youtube Channel
Related Manuals for Taramps T 0602 MULTICOLOR
Summary of Contents for Taramps T 0602 MULTICOLOR
- Page 1 MULTICOLOR CAR SOUND MIXER The installation of this product must be made by a qualified professional.
-
Page 2: Term Of Warranty
• Controls Term of warranty TARAMPS, located on Highway: Julio Budisk, SN, KM 30 – Alfredo Marcondes, SP - Brazil, ZIP CODE 19180-000, guarantees this product against any defects on terms of project, making, assembling, and/or with solidarity, due to project vices which cause it improper or inadequate to its original use within 12 months from the date of purchase. -
Page 3: Safety Requirements
Failure to heed the instructions will result in risk of injury to user or product damage. Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units which were previously produced. -
Page 4: Important Recommendations
Presentation T 0602 MULTICOLOR mixer was designed for sound systems allowing the mixing of several types of audio signals with high delity, ensuring the original dynamics of the sound. It has a 4-band equalizer that allows you to increase or decrease speci c ranges of bass, mid- bass, mid-high and treble, allowing professional control in any situation. -
Page 5: Product Overview
Product overview On this page you have an overview of the T 0602 MULTICOLOR sound mixer, you will better understand the commands on the next page. To be able to use all the product commands, carefully read all the commands below. Install the mixer in an easily accessible place and, if fixing is necessary, use the 4 screwing holes to avoid possible vibrations. - Page 6 Connections IN - Inputs MIC / LINE Balanced inputs: For XLR (Canon) and TRS connectors. ATTENTION: these inputs DO NOT HAVE PHANTON POWER. LINE Unbalanced inputs: Inputs for RCA or (TRS 1/4”) connector. They allow you to receive signals from several types of sound gear such as CD/DVD/MP3-player, audio processors, ... OUT - Outputs AUX OUT...
- Page 7 Functions Controls Adjusts the input signal level. It must be used in case of input saturation, signaled by the CLIP LEDs. Increases or reduces treble by up to ±15dB Increases or reduces mid-high by up to ±15dB Increases or reduces mid-low by up to ±15dB Increases or reduces low by up to ±15dB Adjusts the audio level of the channel (channel 1, 2, 3, 4, 5 or 6) that will be mixed at the outputs.
- Page 8 fill in red. strobe effect on white giroflex effect name TARAMPS going left color bomb effect matrix effect fixed color: red fixed color: orange fixed color: yellow...
- Page 9 fill in red. strobe effect on white giroflex effect name TARAMPS going left color bomb effect matrix effect fixed color: red fixed color: orange fixed color: yellow...
-
Page 10: Installation
02 03 The T 0602 MULTICOLOR was designed to be used in car audio systems with a 12V battery, but it can also be used with an external 12V plug adapter with a current of at least 2A, which must be purchased separately (in this case, the consumer should pay attention to the adapter plug that should be standard P4-2mm) . -
Page 11: Connection Examples
Installation Connection examples - 1 Head unit EFFECTS Acessory Amplifier 1 Amplifier 2 Illustrative Images... - Page 12 Installation Connection examples - 2 Head unit EFFECTS Sound system 1 Sound system 1 Illustrative Images...
-
Page 13: Technical Features
Weight: 1.00 Kg (2,2 lb) * The consumption of the T 0602 MULTICOLOR may vary according to the effect used. Taramps reserves the right to modify the content of this manual without prior notice and without any obligation to apply the modi cations to previously produced units. - Page 14 Manufactured by: TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Highway: Julio Budisk, SN, KM 30 Alfredo Marcondes - SP Made in Brazil...
Need help?
Do you have a question about the T 0602 MULTICOLOR and is the answer not in the manual?
Questions and answers