Page 1
F900 Plus Wireless Electronic Fence TRAINING GUIDE Version: WT-F900PLUS-V1...
Page 2
Kind Reminder: Prior to the successful implementation of the F900Plus Wireless Electronic Fence, it is crucial to provide proper training for your pet. We strongly recommend a thorough review of the following training guidelines. Please be aware that the F900Plus Wireless Electronic Fence is not a physical barrier.
4. Each training session should last 10 to 15 minutes. Avoid rushing the process, shorter, more frequent sessions are more effective than longer, infrequent ones. 5. Even if you perceive a positive response from your pet, it is vital to complete the entire training program. Reinforcement is key! 6.
Page 4
Step 2: Set the Fence Boundary 1. Power on the device and pair it with the receiver to ensure the receiver can receive commands.Set the transmitter to the "Fence" mode. DOG FENCE SYSTEM Boundary Working DOG FENCE SYSTEM Mode Boundary Training Fence Forbidden...
Page 5
DOG FENCE SYSTEM Boundary Working Mode 120Ft 10Ft 55Ft 3. Position the transmitter: ① Place the transmitter in the center of the pet's activity area or in a tested suitable location. ② Ensure the location is free from obstructions, dry, well-ventilated, and rainproof.
Step 3: Place Boundary Flags 1. Boundary flags serve as visual indicators of the fence boundaries. 2. Place a boundary flag every 10 feet along the ground at the set boundary line. 10 feet 10 feet 10 feet 10 feet Begin training:...
Page 7
Setup: Set the F900Plus collar to vibration mode (A1). Place a separate collar around your pet's neck and attach a leash. (A2) (Note: Ensure that the leash does not intersect with the F900Plus collar to avoid external pressure on the collar.) Prepare your pet's favorite treats (like jerky, hot dogs, etc.) as rewards.
Steps: 1. Lead your pet within the boundary area using the leash, engaging in conversation and praising its behavior. 2. Fully control your pet with the leash and approach the boundary flags(A3). When your pet reaches or crosses the boundary, a Level 1 audio warning is activated. If they remain beyond the boundary, a Level 2 warning (sound + vibration) is triggered.
Page 9
Setup: Set the F900Plus collar to static mode(B1). Place a separate collar around your pet's neck and attach a leash. (B2) (Note: Ensure that the leash does not intersect with the F900Plus collar to avoid external pressure on the collar.) Prepare your pet's favorite treats (like jerky, hot dogs, etc.) as rewards.
Steps: 1. Repeat steps 1-4 from Stage One. 2. Pay attention to your pet's subtle reactions, such as lifting its ears, turning its head, or looking at the ground(B3). 3. Continue training at the same flag until your pet refuses to enter the boundary area(B4).
Page 11
DOG FENCE SYSTEM Boundary Working In Sleep Mode No Singal Create distractions to entice your pet into the boundary area. For example: ① Have a family member walk from inside to outside the pet area. (D1) ② Throw a ball or toy outside the safe radius. (D2) ③...
Page 12
Steps: 1. Fully control your pet with the leash to distract it. 2. If your pet is not distracted, praise and reward it. 3. If your pet reacts to the distraction, guide it towards the boundary area. 4. If your pet does not turn back within 3 seconds, assist it back into the safe area.
Page 13
Objective: To enable your pet to move freely, play, and run within the safe radius, free from restraints. Setup: Adjust the F900 Plus collar to suit your pet based on the training from the previous nine days (if your pet no longer escapes the boundary area, you may opt for the vibration mode).
Page 14
Steps: 1. Have your pet wear the F900 Plus collar and enter the safe radius. (No additional collar or leash needed.) 2. Walk and play with your pet in the yard, staying within the safe radius. 3. Watch your pet in the yard while doing other tasks, checking on it periodically to prevent escape.
Need help?
Do you have a question about the F900 Plus and is the answer not in the manual?
Questions and answers