Download Print this page

Troubleshooting; Maintenance - Curtis 1604 Manual

Switch mode battery chargers for lead-acid batteries

Advertisement

5
6
Curtis 1604/08 Manual
Problem
Lights do not turn on.
Yellow light blinks 1x
Yellow light blinks 2x
Yellow light blinks 3x
Yellow light blinks 4x
Yellow light blinks 5x
Yellow & Green lights
blink simultaneously
Yellow & Green lights
alternately blink
Cleaning:
Excess dirt or grime may be removed from the unit by wiping it with a cloth
dampened with water.

TROUBLESHOOTING

Possible Causes & Solutions
No power. Plug the unit in.
No power. If the outlet is damaged, try another
outlet on another circuit.
Battery manufacturer's rated capacity may
exceed charger's rating.
Battery may be damaged or old.
Battery manufacturer's rated capacity may
exceed charger's rating.
Battery may be damaged or old.
Battery manufacturer's rated capacity may
exceed charger's rating.
Battery may be damaged or old.
Unit may be damaged if operation does not
resume after AC power is removed and reapplied.
Battery voltage exceeds charger specified
operating range.
Charger overheated. Remove power, wait ten
minutes and then reapply power.
Battery may not be connected to the charger.
Battery may be severely discharged (<6VDC).
Battery connections may be reversed.
Charger is in the program mode. Handheld
programmer is connected to the charger.
Disconnect the programmer from the charger.

MAINTENANCE

page 9

Hide quick links:

Advertisement

loading

This manual is also suitable for:

1608
Save PDF