1. Manuals
  2. Brands
  3. Aseko Manuals
  4. Water Filtration Systems
  5. ASIN AQUA Salt
  6. User manual

Aseko ASIN AQUA Salt User Manual

Electrolyser for disinfection of the swimming pool water
Hide thumbs Also See for ASIN AQUA Salt:
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
Salt
ASIN AQUA
®
EN
ELECTROLY SER FOR DISINFECTION
OF THE SW IMMING POOL WATER
Electrode TE–25
INTEGRATED
VS PUMP
CONTROL
w w w.asekopool.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ASIN AQUA Salt and is the answer not in the manual?

Questions and answers

Related Manuals for Aseko ASIN AQUA Salt

Summary of Contents for Aseko ASIN AQUA Salt

  • Page 1 USER MANUAL Salt ASIN AQUA ® ELECTROLY SER FOR DISINFECTION OF THE SW IMMING POOL WATER Electrode TE–25 INTEGRATED VS PUMP CONTROL w w w.asekopool.com...

  • Page 2: General Safety Information

    General safety information This user manual contain basic information that should be observed during assembly, start-up, operation, and maintenance. Therefore, this user manual must be read by installers and operators prior to assembly and start/up, and must be accessible to every user of this unit. Additionally, all further safety information in this document must be observed.
  • Page 3 The chemicals used with the ASIN Aqua must be handled in a safe manner to prevent damage or personal harm. Aseko recommends you always use personal protective safety equipment when handling the pH and chlorine agents. Refer to the Materials Safety Data Sheet (MSDS).
  • Page 4 What do you receive in your box Water thermometer with housing #13192 Device ASIN AQUA Salt Probe housing 2 pcs #12013 Peristaltic pumps #12093 Flowmeter with filter Electrode TE–25 #12106 CLF probe #12052 Redox probe for SALT #12113 pH probe Long Life #12012...

  • Page 5: Available Optional Accessories

    Redox Buffer #12063 #13192 BESGO 5-way BESGO 3-way BESGO 4-way #83103 #83130 #83150 ASEKO original chemical solution 20 l or 5 l volume pH MINUS #12130 pH PLUS #12120 ALGICID #12156 Volume 10 kg Bottle 1 kg SALT PURE 10kg #13344...

  • Page 6: Water Treatment

    ASIN AQUA Salt With ASIN AQUA Salt you are getting the top-class high precision pool water management and disinfection system. Combination of worlds popular water treatment by creating the chlorine with electrolysis of slightly salted water in the pool (3-4kg salt per 1m3), precise measuring, by FREE Chlorine Membrane Probe, with digital intelligence and connection to ASEKO Web Services makes from ASIN AQUA Salt the best solution for Your pool.
  • Page 7 Pool technology Switching BOTTOM / OVERFLOW management At the set times of the TIMER, water flows through the OVERFLOW (the relay is activated). Outside the set times of the TIMER, water flows through the Filtration Time Control bottom drain (relay deactivated). The pool cover does not affect the BOTTOM / OVERFLOW Daily, automatic start of the filtration system in individually switching.
  • Page 8 40 °C • Before installing, ensure that pool water is chemically clean and without dirt. Install the mounting rail and attach the ASIN AQUA Salt to the wall. Choose a ALGICID 5 °C location with a free space of at least 40 cm in all directions, and a height above the floor must not be higher than 150 cm.

  • Page 9: Installing The Probes

    Installing the Probes Carefully insert the pH, CLF or REDOX probe into the housing. Hand tighten or use the plastic wrench socket for probes. To connect the probe tighten the connector on the probe connection cable. After probes have been inserted, slightly tightened and connectors have been connected, ASIN AQUA is ready for connection to the water system of your pool.
  • Page 10 ALGICID Electronic flowdetector with filter and salinity sensor 184 mm Gluing 50 mm Ø 50 mm 13 mm 20 Nm FILTRATION 4-WAY BESGO PUMP VS HEATING...
  • Page 11 Connection of electrode TE-25 One of the key components of the ASIN AQUA Salt device is the titanium elec- Electrode TE–25 trode TE-25 with a ruthenioiridium surface, which enables electrolysis of pool water and chlorine generation. Place the electrode in the filtration circuit branch according to the diagram on the previous page.
  • Page 12 ALGICID INLET OUTPUT MEASURED WATER SUPPLY MEASURED WATER DRAINAGE FILTRATION 4-WAY BESGO PUMP VS HEATING...
  • Page 13 Pool Water Connection Measuring Water valve #12005 Screw the measuring water valve in the glue head D50 with thread G1 / 4 “#12134, glued to the T-piece. Tighten the measuring water valve into the head by hands only. Do not use pliers or other tools. Glue head D50 with thread 1/4“...
  • Page 14 ALGICID Algicide Max 8 m pH MINUS FILTRATION 4-WAY BESGO PUMP VS HEATING...
  • Page 15 Pool Chemicals Connection Plug with Screw the injection valve in the glue head D50 with thread G1 / 4 “ #12134, D = 50 with glued to the T-piece. Tighten the injection valve into the head by hands thread 1/4“ only.

  • Page 16: Accessories Connection

    POWER SUPPLY Accessories Connection ZDROJ NAPÁJENÍ 230 V ~ 50 Hz 230 V ~ 50 Hz RELAY 230 V, MAX 1 A 230 V relé Solenoid valve Solenoid filling dopuštění max 1A Besgo valve 5W Besgo 5 W Filter backwash Praní...
  • Page 17 VS Pump connection WARNING Always check the connection according to the current user manual of your pump manufacturer. Speed TYP A TYP B TYP C STOP STOP Relay status HAYWARD (older type) TYP C TYP A Speed 3 Speed 2 SPECK TYP A UWE EO PM...

  • Page 18: Power Supply

    (filtration power supply - max. 1.4 kW / 230 VAC). protected by a residual Connect the 230 V / 50 Hz mains cable to ASIN AQUA Salt (on the right side). current device (RCD). The mains socket outlet must be protected by a residual current device (RCD).

  • Page 19: Installation Test

    Installation Test WARNING: Any obstacles, bubbles or leaks in the connecting tube will prevent ASIN AQUA Salt from correct operating. The clear plastic tube allows you to monitor flow of liquid to the injecting valves. Before commencing the operation, test ASIN AQUA Salt installation.

  • Page 20: Touch Screen Description

    Touch screen description Home Screen The home screen displays measured values, required values and status information. E.g. click on the Chlorine to enter the setting of the required chlorine value. Required Value Measured Value The chlorine pump status – ON. ON indicates the current status of ON - filtration runs according to Enter the settings.
  • Page 21 Settings Back to the home screen. More information for Back to the previous currect screen. screen. Movement through Menu Movement in menu to the previous page. ON - function is switched on Indicator of the current page and the total number of pages.
  • Page 22 Configuration Date and Time To ensure the correct function of timers, set the current date and time. Pool Volume To ensure the correct function of ASIN AQUA, enter the correct volume of your pool. Calculate your pool volume in m Length (L) times width (W) times depth (D) is volume (V) - (L × W × D = V).
  • Page 23 Smart Heating Water Temperature Measurement and Heating Control The water thermometer should be installed in the inlet pipe coming from the pool. Never install it behind the heat exchanger. When the temperature drops below the required value, the relay switches ON your heat source (heat pump, electric heating, gas boiler circulating pump).

  • Page 24: Winter Mode

    Winter mode Activating this function set the device into the special Winter mode. This mode prevents the pool water from freezing and keeps the water clean with dosing of algaecide. In the Winter mode following function are deactivated: chlorine dosing, pH dosing, flocculant dosing, water filling, filter backwash.

  • Page 25: Flow Detection

    Concentration pH – If you use the original ASEKO Pool & SPA chemicals keep the preset value. In case of use of non-original chemicals adjust concentration according to data on the label of a chemical used.

  • Page 26: Programmable Relay

    Programmable relay Solar heating To use this function, in the menu PROGRAMMABLE RELAY choose the option SOLAR. Connect the air thermometer to the solar absorber and to the POTENTIAL-FREE relay TIMER / HEATING connect what is to be controlled by the relay. Once the temperature of the solar absorber is 5 °C higher than the temperature of the water, ASIN AQUA activates the relay which starts the circulation of the water to the solar absorber.
  • Page 27 Other automatic functions Switch of pool water flow - Besgo 3w BESGO 3-way OVERFLOW / BOTTOM DRAIN #83140 During set filtration timer periods, water flows through the OVERFLOW (relay is activated). Outside the set filtration timer periods, water flows through the BOTTOM DRAIN (relay deactivated).

  • Page 28: System Start-Up

    The amount of chlorine produced depends only on the concentration of salt in the pool water. Never switch on the ASIN AQUA Salt before the salt in tha water is completely dissolved. Electrode connection to ASIN AQUA Salt must be done only when disconneted power supply.
  • Page 29 Salt to be used SALT Do not use rock salt. All additives may cause electrode lifetime shortening. ASIN AQUA Salt is designed to electrolyze water with 4 kg/m salt BIOCID CERTIFIED concentration. Electrode may be damaged at lower salt concentrations than 1,5 kg/m .
  • Page 30 If you have the REDOX probe, set the disinfection to 000 mV. Close the water supply to the probes CLOSE CLOSE ASIN AQUA Salt displays no flow to the probes. Perform superchlorination SuperCHLOR Perform superchlorination of pool water with Super CHLOR (inorganic active #13120 chlorine without stabilizers).
  • Page 31 Warning No flow to probes turns off automatically. pH Setting Considering that the ASIN AQUA Salt water treatment system is efficient in the broad pH range, it is recommended to enter the required pH value equal to pH value of water you refill or slightly lower.
  • Page 32 If you use the CLF probe For the correct functionality of the CLF probe you must observe the following conditions: pH of the pool water The pH value should be between 6.8 and 7.5. The pH of the pool water must be stable. If the pH value fluctuates, the value of the chlorine changes accordingly.

  • Page 33: Fine Tuning

    If you use the Redox probe For the correct functionality of the REDOX probe, you must observe the following conditions: pH of the pool water The pH value should be between 6.8 and 7.5. The pH of the pool water must be stabilized. If the pH value fluctuates, the value of the Redox changes accordingly.

  • Page 34: Safety Functions

    Safety Functions Maximum Number of pH Doses - without Probe Response If the measured pH value does not decrease even after preset maximum number of doses (according to the settings), ASIN AQUA stops pH dosing and an error message appears on the display. The other ASIN AQUA functions are not limited.

  • Page 35: Ph Probe Calibration

    In Operation Measurement and Calibration pH Probe Calibration Calibration is not possible When pH is being measured in operation, there may be a difference between when the new value differs the value measured by ASIN AQUA and the actual pH value in water. Proceed to by more than 1 from the the calibration.
  • Page 36 CLF Probe calibration Do not calibrate the probe until the water in the pool is thoroughly mixed and the value displayed on the ASIN AQUA Salt is stable. This may take several hours. Perform calibration of the CLF probe when the manually measured value of free chlorine is equal to or higher than the value you are calibrating to.

  • Page 37: Salinity Calibration

    Warning: Salinity calibration is not possible if the water thermometer is not connected. Water Thermometer Calibration If water temperature is different from temperature shown by ASIN AQUA Salt, calibrate the thermometer in the water thermometer calibration menu. Air Thermometer Calibration If air temperature is different from temperature shown by ASIN AQUA Salt, calibrate the thermometer in the air thermometer calibration menu.

  • Page 38: Maintenance

    Maintenance #12073 Replacement hose for the pump PP 60 To ensure the optimum efficiency, perform visual checks and maintenance of ASIN AQUA on a regular basis. Pump tube replacement To prevent the pump from failing, it is recommended to replace the tube #12073 every 24 months.

  • Page 39: Fuse Replacement

    420 mV at the buffer value of 475 mV. Test the probe’s response to positive or negative changes in water with 0 chlo- rine concentration. ASEKO covers supplied probes to with two year warranty period Electrolysis cell cleaning Electrolysis cell cleaning In operation, the electrolysis cell is gradually clogged by sediments from the hard water, that must be eliminated repeatedly.
  • Page 40 Winterizing - storage during winter If you want to operate ASIN AQUA in Winter mode, go to the chapter Configura- tion - Winter mode. If you do not want to operate the device in Winter mode, it is necessary to winterize the device and all its components (store them when not in use).
  • Page 41 Winterizing of probes #12154 Skladovací jímka Winterizing of pH and Redox probe Remove the probe from the housing, dry it with a paper towel and place it in a storage sump filled with a special storage liquid. See probes manual at the website manuals.asekopool.com.

  • Page 42: Internet Connection

    LAN cable. Wifi connection If you install the ASIN AQUA Salt in place where is no access to your private network by wired connection but your Wifi has enough signal, you can connect the ASIN AQUA Salt to your Wifi by use of Wifi extender.
  • Page 43 INTERNET Home network INTERNET 3G / LTE WIFI EXTENDER Wifi extender INTERNET Powerline via 230 V 230 V socket outlet INTERNET...

  • Page 44: For Android

    After you connect the ASIN AQUA Salt to the internet download the Pool Live application to your smartphone. Application is available for iOS and Android operation systems.
  • Page 45 The web application for detailed monitoring of the pool water quality by means of well-arranged graphs. It shows all the measured parameters as well as ASIN AQUA Salt actions up to 30 days back. This application is giving you the detailed information of the pool status and detailed review of all events, taken actions and act levels of monitored items up to 30 days back.

  • Page 46: Error Messages

    Error messages Those error messages appear when: Agent run out • Check liquid levels on a regular basis, refill in time. Dosing pump does not dose • Leakage in connection of PE tubes or they are damaged. • Failure of dosing pump. Check whether pump is running. If so, check the hose inside the pump for damage or breakage and replace it, if required.
  • Page 47 Too rapid pH change Too rapid change of pH is usually caused by refilling water directly to the skimmer. If such rapid change of pH occur, ASIN AQUA stops controlling pH for two hours. This limitation can be manually disabled. After pH has been stabilized or two hours have elapsed, ASIN AQUA changes over to the normal mode.
  • Page 48 Connection ASIN AQUA Salt to ASIN Salt The ASIN Salt expansion module must be connected to the ASIN AQUA Salt control unit with a cable. To activate the external control, select the EXT mode on the display. up to 10...
  • Page 49 Select the EXT mode up to 10 modules Connection cable to ASIN Salt TE 25 – ASIN AQUA Salt TE 25 – ASIN Salt HEATING TO POOL FROM POOL...
  • Page 50 Speed 0 Speed 0 STOP STOP STOP relative humidity and temperature. The setpoints can be set on the ASIN AQUA Salt device and a probe calibration can be carried out via the external display. Salinita Salinita Salinita External Touchscreen Display #12048 Sepnuto –...
  • Page 54 USER MANUAL ASIN AQUA Salt VS w w w.asekopool.com...

Table of Contents