Table of Contents
Advertisement
Quick Links
ALLEN + ROTH and logo design are trademarks or
registered trademarks of LF, LLC. All rights reserved.
ATTACH YOUR RECEIPT HERE
Purchase Date _________________________
Thank you for purchasing this ALLEN + ROTH product.
Questions, problems or missing parts?
Before returning, contact us at:
866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday or ascs@lowes.com.
AB23017
welcoming • sophisticated • inspiring
WALL SCONCE
1
RATED FOR
WET
LOCATIONS
ITEM #5644938, 5644937
MODEL #43039, 43040
Español p. 14
US
Advertisement
Table of Contents
Related Manuals for Allen + Roth 43039
Summary of Contents for Allen + Roth 43039
- Page 1 • sophisticated • inspiring RATED FOR LOCATIONS ALLEN + ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved. ITEM #5644938, 5644937 WALL SCONCE MODEL #43039, 43040 ATTACH YOUR RECEIPT HERE Español p. 14 Purchase Date _________________________ Thank you for purchasing this ALLEN + ROTH product.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Package Contents..............3 Hardware Contents. -
Page 3: Package Contents
PACKAGE CONTENTS PART DESCRIPTION QUANTITY Fixture Rattan Shade Screw Cap (preassembled to Fixture [A]) Switch (preassembled to Fixture [A]) Wall Plate (preassembled to Fixture [A]) Mounting Screws (preassembled to Wall Plate [E]) Power Cord (preassembled to Fixture [A]) Plug (preassembled to Power Cord [G]) Grommet (preassembled to Fixture [A]) Glass Shade Wire Cover... -
Page 4: Safety Information
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. Failure to do so could lead to electrical shock, fire or other injuries that could be hazardous or even fatal. • Before you begin installing the light fixture, disconnect the power by removing fuses or turning off the circuit breakers. -
Page 5: Assembly Instructions For Plug-In Installation
ASSEMBLY INSTRUCTIONS FOR PLUG-IN INSTALLATION 1. Turn off the circuit breakers and the wall switch to the supply line leads. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. This fixture has two options for installation. To install the fixture using the plug-in method, continue to the next step. - Page 6 ASSEMBLY INSTRUCTIONS FOR PLUG-IN INSTALLATION 4. Align the keyhole slots on the wall plate (E) with the screws (AH) on the wall and then gently push the wall plate (E) against the wall and slide down until secure. 5. Remove the screw caps (C) from from fixture (A). Lift the rattan shade (B) over the socket of the fixture (A) and attach screw caps to secure the rattan shade (B).
- Page 7 ASSEMBLY INSTRUCTIONS FOR PLUG-IN INSTALLATION 7. Insert plug preassembled to power cord (G) into nearby electrical outlet and use switch on underside of fixture (A) to turn ON. WARNING: For indoor locations - If using the fixture indoors in a wet location, it must be connected to a supply circuit that is protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electrical shock or death.
-
Page 8: Assembly Instructions For Hardwire Installation
ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION 1. Turn off the circuit breakers and the wall switch to the supply line leads. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. This fixture has two options for installation. To install the fixture using the hardwire method, continue to the next step. - Page 9 ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION 4. Use the two mounting bracket screws (RR) to attach the mounting bracket (FF) to the outlet box (sold separately). Note: Ensure two mounting bracket tabs are parallel to the horizon. Hardware Used Mounting Bracket Mounting Outlet Bracket Screw...
- Page 10 ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION 7. Loosen the ground screw on the mounting bracket (FF) and wrap the bare wire from the fixture (A) around the ground screw. Tighten the ground screw Ground to hold the bare wire in place. Note: Ensure there is Screw enough of the copper wire extending from the ground screw to connect to the ground wire from the outlet...
- Page 11 ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION 10. Remove the screw caps (C) from from fixture (A). Lift the rattan shade (B) over the socket of the fixture (A) and attach screw caps to secure the rattan shade (B). 11. To prevent water, rain, or moisture from entering fixture (A), use waterproof caulk (sold separately) to seal the perimeter.
- Page 12 ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION 13. Turn ON the electrical power at the main fuse or circuit breaker. Assembly is complete. 14. Move switch on underside of fixture (A) to ON position. Switch...
-
Page 13: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Bulb will not light. 1. Fixture may be wired 1. Check wiring. incorrectly. 2. Replace bulb. 2. Worn or broken bulb. 3. Ensure switch is in ON position. THREE-YEAR LIMITED WARRANTY The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase.
Need help?
Do you have a question about the 43039 and is the answer not in the manual?
Questions and answers