Advertisement
Quick Links
Star Split Phantom
Model ULB24
Undercover Interior LED Lightbar
With Gen 4 Starburst LEDs
Please Note: These instructions are provided as a general guideline only. Specific
mounting and/or wiring, may be necessary and are the sole responsibility of the
installer. Star Safety Technologies assumes no responsibility for the integrity of
the installation for this or any of its products.
455 Rochester Street
585-226-9500
www.StarSafetyTechnologies.com
™
Avon, NY 14414
(F) 888-478-2797
PLIT390 REV. K
IMPORTANT:
CAUTION:
WARNING!!!!
Before installing any of the brackets,
slide the enclosed rubber channel
over the front edge of the baffle .
There are several optional mounting brackets that can be used to mount your
™. Each light is packaged with the bracket that was selected at the time the light
Phantom
was ordered. Please review the separate mounting instructions that are included with each
bracket. You can visit www.star1889.com for a detailed list of available mounting brackets
and their known vehicle compatibility.
1/26/24
Please read all of the following instructions before installing your new
Split Phantom™
LED undercover lightbar.
Please be sure to check that your cigarette plug outlet is properly fused.
Testing the light before this fuse is properly installed will void the
warranty on the light.
Care should be taken when positioning this warning light so that the light
and/or cord does not interfere with the proper operation of the driver-
side or passenger- side airbag! Failure to heed this warning may result
in serious or fatal injury.
Gasket Installation
Mounting
Star Safety Technologies assumes no responsibility for the
secure mounting of this light. It is the responsibility of the
installer and/or owner to ensure the lightbar is mounted
securely. Check your light every time you enter the vehicle
to ensure that it is mounted securely.
-1-
Star Half
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Grote Star Split Phantom ULB24
Summary of Contents for Grote Star Split Phantom ULB24
- Page 1 Star Split Phantom IMPORTANT: Please read all of the following instructions before installing your new ™ Split Phantom™ LED undercover lightbar. CAUTION: Please be sure to check that your cigarette plug outlet is properly fused. Testing the light before this fuse is properly installed will void the Model ULB24 warranty on the light.
- Page 2 Baffle Adjustment Operating Instructions 1. After the light has been mounted (see separate mounting instructions), if adjustments CAUTION!!! Once the light is secured, route your cord such that permit, slide the light forward until the top of it is touching the windshield. it does not interfere with the vision of the driver or the operation 2.
- Page 3 Service Pattern List Slow Warn * Fast Warn These lights use state-of-the-art Light Emitting Diode (LED) technology. These warning Superfast Warn lights are comprised of ultra-high intensity LEDs that are controlled by a solid state flasher Warn Fade unit to efficiently produce light output with lifetimes up to 100,000 hours. Under normal Pre-Pop Warn circumstances, you will not need to replace any LEDs in this light.
- Page 4 NOTICE Due to continuous product improvements, we reserve the right to change any specifications and/ or information contained in this manual at any time without notice. Star Safety Technologies makes no warranty of any kind with regards to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Need help?
Do you have a question about the Star Split Phantom ULB24 and is the answer not in the manual?
Questions and answers