Mount the black wires on the floor of the vehicle. • The white wire is mounted above a 0/12V socket, which only supplies 12V when the vehicle is started. • The 12V plug then goes to the refrigeration unit or electric generator. 130-USM.01 User Manual VebaBox Accessories...
Page 4
130-USM.01 User Manual VebaBox Accessories...
Page 5
Equipment Contents • Equipment • Power cable 110/230V • CEE7-3/C20, Nema5-15/C20 Adapter for US Models 130-USM.01 User Manual VebaBox Accessories...
Page 6
AC + DC + Charger PSB 250 250Ah DC Power 12 1 GL 0 Generator PSB 250 230 1 GL 250Ah DC Power Generator + Charger PSB 250 1230 1 GL 250Ah AC + DC Power Generator + Charger 130-USM.01 User Manual VebaBox Accessories...
Page 7
Component name 250Ah Models 130-USM.01 User Manual VebaBox Accessories...
Page 8
75Ah and 150Ah models 130-USM.01 User Manual VebaBox Accessories...
Page 9
Screen 1: Percentage of Capacity Remaining 2: Amperage hour remaining 3: Display of remaining capacity 4: Voltage Consumption 5: Amplifier Absorption 6: Power Consumption 130-USM.01 User Manual VebaBox Accessories...
Page 10
To charge the battery and allow the thermal units to operate at the same time, always connect the 110/230V output of the power supply to the thermal unit(s) before connecting it to the power source. 130-USM.01 User Manual VebaBox Accessories...
How the control panel works 130-USM.01 User Manual VebaBox Accessories...
Page 12
Contents • Display with on/off switch • 5 meter connection cable Component name 1. Cooling Mode 2. Temperature Select/Adjust Buttons 3. Heating mode 4. SET button 5. Temperature display 6. Alarm Signal 130-USM.01 User Manual VebaBox Accessories...
Page 13
Lower limit of the set -20°C (-4°F) point Maximum set point 40 °C (104 °F) limit Temperature 0.1°C/10°C hysteresis (0.2 °F/18 °F) Duration of 0/10 minutes connection delay Temperature -10°C/10°C Compensation (-18°F/18°F) Temperature Units °C/°F 130-USM.01 User Manual VebaBox Accessories...
Page 14
The control panel automatically takes commands so you can operate the refrigeration unit from the cab. To do this, the on/off button on the refrigeration units must be turned off. 130-USM.01 User Manual VebaBox Accessories...
2 end caps • 1 x Left Bracket • 1 x Right Bracket • 2 tension straps Not included in the scope of delivery: Mounting material The mounting frame prevents the VebaBox from slipping on the vehicle. 130-USM.01 User Manual VebaBox Accessories...
Page 16
130-USM.01 User Manual VebaBox Accessories...
Page 17
130-USM.01 User Manual VebaBox Accessories...
2 end caps • 1 Support Link • 1 x Right Bracket • 2 tension straps Not included in the scope of delivery: Mounting material The mounting frame prevents the VebaBox from slipping on the vehicle. 130-USM.01 User Manual VebaBox Accessories...
Page 19
130-USM.01 User Manual VebaBox Accessories...
Page 20
Mounting 80FRA15S and 80FRA15 1. Place the installation rails (1) on the car's charging platform, keeping in mind that the VebaBox may be squeezed between the rails. The rails are fixed with the kit and screws on the wooden plate in the load compartment. These are not included and depend on the type of vehicle.
Page 21
7. Slide the box all the way against the limit switch and install the drain hose for condensate water. 8. Click on the supplied tension straps on the installation guide. 9. Tighten the tension straps with constant force. 130-USM.01 User Manual VebaBox Accessories...
Need help?
Do you have a question about the PSB 75 12 1 GL 0 and is the answer not in the manual?
Questions and answers