Advertisement
Quick Links
Harper Floor Mount Installation Guide
ATTENTION:
VANITY MUST BE SECURED TO WALL. PLEASE USE GUIDE IN CONJUNJTION WITH GENERIC INSTALLATION BOOKLET.
1
2
3
Remove all drawers from vanity by squeezing
both levers in on the underside of the drawer,
at the same time (to activate release) and pull
drawer out to remove.
Align the legs with the dowels in the vanity
end panels and lightly tap them into place
ensuring a snug fit.
Note: You many want to carefully flip the vanity
upside down to make this step easier.
Using the provided 40mm Hospa screws, screw
through the holes in the vanity ends, into the
legs to secure into place.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Adp Harper
Summary of Contents for Adp Harper
- Page 1 Harper Floor Mount Installation Guide ATTENTION: VANITY MUST BE SECURED TO WALL. PLEASE USE GUIDE IN CONJUNJTION WITH GENERIC INSTALLATION BOOKLET. Remove all drawers from vanity by squeezing both levers in on the underside of the drawer, at the same time (to activate release) and pull drawer out to remove.
- Page 2 If the product is not installed in accordance with these instructions, your ADP warranty may be void and the homeowner may have a claim against you (the installer). Hey home owner!
Need help?
Do you have a question about the Harper and is the answer not in the manual?
Questions and answers