Page 2
Page 2 of 3 NERA 6 Drawer Low Double Dresser ASSEMBLY INSTRUCTIONS Read these instructions carefully and keep for future reference. Refer to parts inventory for guidance, and 15 min ensure you have all pieces before starting. When assembling, place all parts on a soft, clean, and flat...
Page 3
Page 3 of 3 NERA 6 Drawer Low Double Dresser ×4 Adjust levelers on side legs as needed. ×12...
Structural integrity is warranted only if all alware here to help. Call us at 1.888.746.3455 during business fasteners are properly installed and tightened, hours, email service@article.com or chat live at article.com. and the drawer is moved only per instruction. FIXED A CROOKED DRAWER ×2...
Page 7
NERA 6 Drawer Low Double Dresser Page 1 of 3 Anti-Tip Installation 1010 Raymur Ave. Vancouver, BC V6A 3T2 ANTI-TIP RESTRAINT INSTALLATION WARNING! Children have died from furniture tipover. To reduce the risk of furniture tipover: 20 min • ALWAYS install anti-tip device provided.
Page 8
NERA 6 Drawer Low Double Dresser Page 2 of 3 Anti-Tip Installation × 2 × 2 Drill holes in wall using 8mm / 5/16" drill bit.
Page 9
NERA 6 Drawer Low Double Dresser Page 3 of 3 Anti-Tip Installation ×4 Insert back drawer to the angle bracket (A). Make sure to take out drawers as shown to secure angle bracket (A) with screws (E).
Page 10
ANTI-TIP Page 1 of 3 Interlock Installation 1010 Raymur Ave. Vancouver, BC V6A 3T2 ANTI-TIP INTERLOCK INSTALLATION WARNING! Children have died from furniture tipover. To reduce the risk of furniture tipover: • ALWAYS install anti-tip device provided. • NEVER put a TV on this product. NOTE: This product has an anti-tip •...
Page 11
ANTI-TIP ANTI-TIP Page 2 of 3 Interlock Installation Interlock Installation If any interlock at any drawers are disengaged - It means the drawers can’t be closed properly. Take the disengaged drawer out. (Please refer to the main assembly instruction above.)
Page 12
ANTI-TIP Page 3 of 3 Interlock Installation Open the peg of the interlock to the position shown above. Put the drawer back into position. If more than 1 drawers are disengaged, simply repeat the above steps until all drawers are in place.
Need help?
Do you have a question about the NERA and is the answer not in the manual?
Questions and answers