Solidyne UNIDEX BLT 200 Owner's Manual
  1. Manuals
  2. Brands
  3. Solidyne Manuals
  4. Recording Equipment
  5. UNIDEX BLT 200
  6. Owner's manual

Solidyne UNIDEX BLT 200 Owner's Manual

Dual bluetooth interface
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UNIDEX BLT 200 and is the answer not in the manual?

Questions and answers

Related Manuals for Solidyne UNIDEX BLT 200

Summary of Contents for Solidyne UNIDEX BLT 200

  • Page 2: Table Of Contents

    Last revision, April 2024 Solidyne® All rights reserved. No part of this manual may be reproduced, copied, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without permission in writing from the publisher.

  • Page 3: Overview

    1 OVERVIEW 2.1 MODE A: CONNECTING TO SOLIDYNE’s BROADCASTING CONSOLES Solidyne BLT200 is a Bluetooth interface that al- lows linking up to two mobile phones to an audio The line of Solidyne compact consoles, including console. It can be used with consoles of any type,...

  • Page 4: Mode B: One-Channel Connection For All Sound Mixers

    AT THE MIXER: An auxiliary mix bus is required to and Bluetooth B through the TIP and RING, respec- generate the signal sent to BLT200 (that is, the re- turn that the person on the other end of the line will www.solidyne.ar BLT200 - Dual Bluetooth Link...

  • Page 5: Mode D: Double Blt200 (4 Cellphones)

    (see below). The CONTROL A and CONTROL B buttons are illu- minated and flash at different rates depending on Image 5: Double BLT200 to two channels the Bluetooth status. www.solidyne.ar BLT200 - Dual Bluetooth Link...

  • Page 6: Pair A Cell Phone With Blt200

    On the phone, it's possible to change the default name finds and registers an external Bluetooth device "Solidyne BLT-A" (or BLT-B) by accessing the Bluetooth de- vice settings. This is necessary to differentiate channels A (for example, headphones, the car audio system, and B when using two BLT200 units.

  • Page 7: Adjust The Volume

    B) until the button lights up (approximately connection is automatic. In others, it will be 5 secs). The button remains flashing slowly in- necessary to choose the SOLIDYNE device termittently indicating that Bluetooth is active. again from a list. If the call was not inter- 2.

  • Page 8: To Make A Call On The Mobile Phone

    RING = Audio B @+4dBu AUDIO IN TIP: Return signal from the mixer console (Mix-Minus) - 10 dBu ~+ 10 dBu RING: output TELCO for Solidyne mixers «EXT HYBRID» Frequency response 50 Hz to 8.000 Hz full vocal range (Bluetooth 4.0/5.0) Distortion (THD) →...

This manual is also suitable for:

Udx-blt200

Table of Contents