Techly I-LAMP-TABLE3 Quick Start Manual

EN
LED TABLE LAMP
Dear Customer, thank you for choosing our LED table lamp. Please read this instruction
carefully before use to fully enjoy the advantages of this product.
MAIN FEATURES
1 Built-in lithium battery
2 3 color temperature: cold light, warm light and natural light
3
RGB night light
4
Protection level: IP65
5
Stepless dimming
6
Material: ABS
7 Main light source: SMD2835 6 pcs cold, 6 pcs warm
8 RGB light: 5050 11pcs
9 Lamp color temperature: 3800±400K; 3000±400K; 4800±400K
10 Lamp power: 1W
11 RGB light power: 0.5W
12 Luminous flux: 100LM-130LM
13 Lithium battery capacity: 1100mAh
14
Adapter: USB-C™ 5V/1A
15
Color Rendering Index: >80
PRODUCT
DESCRIPTION
RGB Light
Button
Light Emitting Brightness/Color
Area Temperature Botton
Type-C™
Port
POWER CONNECTION
Insert the Type-C™ power cable into the
power jack at the rear of the base.
WWW.TECHLY.COM
PRODUCT
INSTALLATION
Insert the lamp-post down into the
base to complete the installation.
Notice:
• Do not use an adapter that cannot directly output 5V voltage by default.
• If the lights flicker or make noise, please replace the power supply device in time.
• Do not connect the adapter contacts to other metal conductor so otherwise product
damage or other hazards may result.
• The external cord of this product cannot be substituted.
• Cannot be used on levels greater than 6 degrees.
NIGHT LIGHT FUNCTION
TIPS
• Power the lamp only through the USB port by connecting it to a PC or in any case to a
DC 5V 1A power source.
• If this lamp not used for a long time, please charge it at least once every month to
prolong the battery life.
• The light source of this lamp is irreplaceable. The whole lamp should be replaced when
the light comes to its end of life.
• Please use it on flat and smooth desk in case of falling. Please do not use it under wet
and extreme high temperature circumstance.
• While the LED light on, do not shine on eyes in short distance to prevent eye injury.
• This product in strong electromagnetic interference may be turned on or off.
• Please, wipe it by soft cotton fabric for surface cleaning and do not use any corrosive
solvents.
• The light source is irreplaceable. Please stop use when actually wear out.
• If a failover occurs, please do not disassemble by yourself to avoid any damage on the
product.
PACKAGE CONTENTS
• LED table lamp x1pc
• USB-C™ cable x1pc
• User's manual x1pc
In compliance with EU Directive WEEE this product is marked with this
symbol. It means that used electrical and electronic products should not
be mixed with general household waste. There is a separate collections
system for these products in compliance with WEEE directive, otherwise
contaminative and hazardous substances can pollute the environment.
With the CE sign, Techly ®
European standards and directives.
LED TABLE LAMP
Long press " " to stepless dimming
the brightness, short press to switch three
color temperature (cold light, warm light,
natural light).
Short press " " to enter RGB light
monochromatic mode, short press again
to pause in the current color, long press to
turn off the RGB light.
ensures that the product is conformed to the basic