Techly I-LAMP-DSK4 Manual

LED TABLE LAMP
I-LAMP-DSK4
Dear Customer, thank you for choosing our LED desktop lamp. Please
read this instruction carefully before use to fully enjoy the advantages of
this product
Main FeatuRes & technicaL PaRaMeteRs
LED TABLE LAMP
• Rated voltage: DC5V
• Rated power: 4.5W
• Touch key to control
• Sensor touch to dimmer
• Smart Timing lights
• Lighting source: Semiconductor super bright LED lamp (LED)
• Three mode light switch: natural light, white light, yellow light
• Min Luminous flux: <200LUX (measured vertically 24cm away from the
lampshade to the table)
• Max Luminous flux: >900LUX (measured vertically 24cm away from the
lampshade to the table)

PRoduct iLLustRation

Rotation
Power on/off button
Input power jack DC 5V
Charge indicator
www.techly.com - info@techly.com
LED TABLE LAMP
EN
I-LAMP-DSK4

oPeRating instRuction

➊
Lamp function: Place the light on the table or platform stably,
push the lamp power switch to ON to power on, Short touch
" " switch on/off the lamp. When the light is on, short touch
" " key, the light can be switched circling: three modes, natural light,
white light, yellow light; default light is natural light.
➋
adjust lamp brightness: When the light is on, long press "
change the brightness of light.
➌
timer function: In any state, long press "
function, Then, the light will flash two times to remind the countdown
function open on, and the time is 40 minutes; If you re-press the "
It will re-clock 40 minutes, until the countdown ends, lighting will shut
down automatically.
➍
Power supply: Use USB power cable to connect the computer's USB
output plug and desktop lamp 3.5mm DC jack to power the LED lamp,
and for charging rechargeable battery as well.
➎
charge status indicator: When you connect the LED lamp with the
3.5mm USB Jack, the red light indicator on, when it is full of charge,
the red indicator is off, the green light indicator on.

Questions and soLutions

FauLt PeRFoRMance
The product does not work
Lamp cap
Lamppost
Touch insensitive
Base
ON/OFF key
Flashing lights or dark
Lamp shutdown key
Light mode key
www.techly.com - info@techly.com
EN

Package contents

• Power adapter x1pc • USB cable x1pc • Manual instruction x1pc

cautions

➊
", to
➋
", will achieve countdown
➌
"
➍
➎
➏
➐
➑
soLution
Low battery and need to charge,
push the power switch to on
Check the power supply
otherwise contaminative and hazardous substances can pollute the
interference, Reconnect the power
enviroment.
Low battery please charge
LED TABLE LAMP
I-LAMP-DSK4
Use or replace power adaptor could be only with the same
specifications and USB port.
While the LED light on, do not shine on eyes in short distance to
prevent eye injury.
This product in strong electromagnetic interference may be turned on
or off.
The lamppost can't be bent; otherwise it would damage the lamppost.
This product is indoor use only.
Protect Product to stay away from raining, moisture fire, high
temperature environment, so as not to damage the product.
Lamp should be often used, if it is not used for a long time, please
charge the lamp one time every 2 month.
When the lamp became dim, it indicates that the lamp is almost out of
power. Please recharge the battery and stop using. Otherwise it may
damage the battery and shorten the battery life.
In compliance with Eu Directive WEEE this product is
market with this symbol. It means that used electrical
and electronic products should not be mixed with general
household waste. There is a separate collections system
for there products in compliance with WEEE directive,
With CE sign, Techly ensures that the product is conformed
®
to the basic European standards and directives.
www.techly.com - info@techly.com
EN