Page 1
The information contained in this document is subject to change without notice or obligation of any kind. AVS makes no representation of warranty, expressed or implied, regarding the information contained herein, AVS assumes no responsibility for accuracy, completeness or...
Page 2
It is the a maximum of 90". installer’s responsibility to make sure the combined weight of all components attached to the SAVC5590B up to (an d NOTE: Due to continuous product improvement, images shown including) the display does not exceed 276 lbs (125 kg).
Page 4
Supplied parts and Hardware D Shelf Tray (x2) C Shelf Support (x4) A Base B Frame H Adjustable Camera G TV Mount Arm (x2) E Lockable Castor (x4) F Back Plate Support Rail I Camera Baseplate J Cable Management Clip (x3) (d) M6 x 16 Philips screw (x22) (c) M6 Washer (x6) (b) M8 Washer (x10)
Page 6
Install Casters to the Base Install Frame to the Base...
Page 7
Install TV Mount to the Frame in Desired Location There are three heights you can adjust the screw holes. Please see below:...
Page 8
Install Camera Shelf in Desired Location Install Shelf Support Rail Choose which position is desired for shelves. Multiple locations are available on the front and back of TV trolley. Put the shelf support into desired location. Attach the front and back trays.
Page 9
Install TV to the TV Mounts Check the TV’s installation hole, and use the appropriate parts (f ) or (e) to install the TV to the mount arm. (f ) Flip the TV and hang it on the backplate. CAUTION: Make sure the screws are tightened once TV is in position to secure the TV.
Need help?
Do you have a question about the SAVC5590B and is the answer not in the manual?
Questions and answers