Cleaning And Care; Outer Surfaces; Inner Surfaces; For Transportation - Beko MGC 20100 User Manual

5

Cleaning and Care

• Unplug your oven before cleaning.
• Do not use abrasive cleaners, steel wools, rough
washing clothes or abrasive chemicals such as
sulphur or chloride on or at any parts of your
microwave oven.

Outer surfaces

• To clean the outer surfaces of the oven, first
wipe them with a soft cloth soaked in warm
soapy water. Then wipe them dry again with a
soft cloth.
• Do not allow water ingress into the ventilation
openings in order to avoid damage to the live
parts inside the oven. Clean the control panel
of your microwave oven only with a damp and
soft cloth.
• Do not use cleaning sprays or more soap and
water. They may cause problems in control mec-
hanism.

Inner surfaces

To clean the inner surfaces of the oven:
• To soften the dried stains, put a glass of water
and boil for 2-3 minutes.
• Clean the inner surfaces and ceiling with a soft
and soapy cloth. And dry again with a soft cloth.
• To remove the odours inside the oven, boil a mix-
ture of water and a few table spoons of lemon
juice for a couple of minutes inside the oven.
22 / 345 EN
• To clean the inner base of the oven, remove the
roller glass tray and roller support. Wash the rol-
ler glass tray and roller support in soapy water.
Then, rinse and dry them.
• Before starting the oven, install the roller
support and glass tray securely.
• When cleaning the inner surfaces of the oven
door, use a non-abrasive soft sponge or cloth.

For transportation;

• Unplug the appliance.
• Pack the glass tray in a way to prevent them from
breaking and moving inside the oven. Transport
it separately if needed.
• Tape the front door to the body.
• Prevent impact against the front glass, door and
panel.
• Transport the product in normal position. Do not
lean it aside or back.
Microwave Oven / User Manual