Page 1
Please read this manual before using your GLM-76 Blood Glucose Meter. If you have any questions or requirements, please contact us or your local distributor.
TABLE OF CONTENTS 1.ABOUT THE METER ……………………………………………………………………………………………………………3 2.GLM-76 BLOOD GLUCOSE METER AND LCD WINDOW………………………………………………………5 3.GLS-76 BLOOD GLUCOSE TEST STRIP………………………………………………………………………………….6 4.SETTING METER PARAMETERS…………………………………………………………………………………………...7 5.PREPARING FOR BLOOD SAMPLING…………………………………………………………………………………..7 6.CHECKING THE CODE………………………………………………………………………………………………………...8 7.PERFORMING A TEST WITH GLS-76 BLOOD GLUCOSE TEST STRIP…………………………………..9 8.UNDERSTANDING YOUR TEST RESULT……………………………………………………………………………...11 9.MEMORY RECALL……………………………………………………………………………………………………………12...
Intended Use intended for in vitro diagnostic use with capillary whole blood. The meter should not The GLM-76 blood glucose meter is designed be used for diagnosis of diabetes or for to quantitatively measure the concentration of testing newborn infant (neonatal testing).
Page 4
7. Interferences: Acetaminophen, Dopamine, The Package of the GLM-76 Blood Glucose L-DOPA, Ibuprofen, Salicylate, Bilirubin, Meter contains: Creatinine, Cholesterol, Triglycerides, Uric acid, EDTA, Galactose, Gentisic acid, 1. GLM-76 Blood Glucose Meter Glutathione, Haemoglobin, Heparin, 2. Lancing Device with CE Marking Maltose, Methyl-DOPA, Tolbutamide, 3.
GLM-76 BLOOD GLUCOSE 1. TEST RESULT 2. DATE: Month/Date. METER AND LCD WINDOW 3. DAY AVG: Appears when the meter Study the meter by reading the diagram. is in the memory mode while recalling 7/14/21/28 day test averages. 4. TIME : 24 hour period format.
GLS-76 BLOOD GLUCOSE TEST STRIP IMPORTANT INFORMATION 1. Do not use damaged test strips or test strips changed in any way. Use test strip immediately after removing it from the vial. Recap the vial immediately and close it tightly. 2. GLS-76 Blood Glucose Test Strips are intended for in vitro diagnostic use with capillary whole blood or control solution.
SETTING METER PARAMETERS Prepare for Blood Sampling Adjustable Setting Date, Time Lancing Device When the battery is installed the first time or Used with lancet to obtain a blood sample. every time it's replaced, the meter will 1. Depth adjustment Cap automatically enter the setting mode.
ADJUSTABLE LANCING DEVICE If the two numbers do not match, please contact us or your local distributor. If you miss seeing the code number, remove the test strip and reinsert it into the 1.Remove the depth 2.Insert a lancet into the 3.Twist off the protective disk 4.Replace the depth meter.
PERFORMING A TEST WITH GLS-76 BLOOD GLUCOSE TEST STRIP 1. Wash your hands in warm, soapy water. Rinse and dry completely. Warm your fingers to increase blood flow. Remove a new test strip from vial. Be sure to tightly re-cap the via after removing test strips.
Page 10
6. Your result will show up in 8 seconds, and it is automatically recorded in the meter’s memory. You may also want to record the result in your logbook. 7. If the test is being done within 2 hours after meal, press“S”button to change the setting from AC to PC (9.2).If the test is a control...
UNDERSTANDING YOUR TEST RESULT-NORMAL BLOOD GLUCOSE RANGE • The normal blood glucose range is 70 to 100 mg/dL (3.9 to 5.6 mmol/L) for fasting and less than 140 mg/dL (7.8 mmol/L) two hours after meals for a non-diabetic adult. Consult your healthcare professionals to find out your target blood glucose value.
MEMORY RECALL The GLM-76 Blood Glucose Meter can automatically store up to 180 results and automatically calculate your average results of 7-, 14-, 21-, 28- days on both AC and PC. When recalling the results, each single result appears from the latest to the earliest with corre- sponding time and date.
1. To practice the test procedure. 2. Gently shake the control solution, 2. To make sure that the GLM-76 Blood Glucose discard the first drop and apply the Meter and GLS-76 Blood Glucose Test Strips control solution to the the right or left edge of the strip.
Electromagnetic Compatibility (e.g. unshielded intentional RF sources), as these can interfere with the proper operation It is the manufacturer's responsibility to provide equipment electromagnetic compatibility TAKING CARE OF YOUR METER information to the customer or user. When the meter is dirty, please clean it by It is the user's responsibility to ensure that a wiping gently with a cotton swab or cloth.
Page 16
REPLACING THE BATTERY NOTE: ・EVERY TIME WHEN YOU REPLACE THE The GLM-76 blood glucose meter's battery BATTERY, THE METER WILL TURN ON life will vary depending on usage, so always AUTOMATICALLY ENTERING THE TIME/ DATE keep a spare available. SETTING.
Page 17
TO REPLACE THE BATTERY 1. Make sure the meter is turned off. Let the front of the meter rest in the palm of your hand. Slide battery compartment door open. 2. Remove the old battery and insert the new 3V Lithium battery into the battery compartment, with the "+"...
Page 18
CLEANING METER Caring for your GLM-76 Blood Glucose Meter is easy - just keep it free of dust. If you need to clean it, please follow the guidelines below carefully to help you get the best performance : • Make sure the meter is turned off •...
DISPOSING YOUR METER During blood glucose measurement the meter itself may come into contact with blood. Used meters may carry a risk of infection. Please dispose your used meter properly after removing the battery according to the regulations applicable in your country. For information about correct disposal please contact your local council and authority.
DISPLAYING MESSAGES AND TROUBLESHOOTING As listed below are problems that may appear with your GLM-76 Blood Glucose Meter when performing a test. These messages will help you to identify certain problems. If you have any concerns or see any other error display, please contact us or the local distributor for help.
Page 21
SYMBOLS CONVEY For in vitro diagnostic B application Lot number Please consult instructions for use Caution,consult accompanying CE Certification 0197 document Temperature Manufacturer limitation/Store at Discarded glucose meters and batteries must be discarded in Authorized containers labelled with WEEE. representative Please comply with local regulations and take appropriate protective measures to dispose of all wastes.
Page 22
0197 CE Certification YASEE BioMedical Inc. NO.9 Xiuyuan Road, High-tech Industrial Development Zone, Qingdao City, Shandong, 266000, China. Tel: 0086-532-68012808 Email: sales@yasee.org Web: www.yasee-med.com Prolinx GmbH Brehmstr. 56, 40239 Duesseldorf Germany...
Page 23
Blood Glucose Meter MODEL:GLM-76 AUTO CODE year warranty Bi-directional 5 years warranty less blood sample 8 seconds test blood sampling...
Need help?
Do you have a question about the GLM-76 and is the answer not in the manual?
Questions and answers