Sennheiser SET 830 S - 04-09 Instruction Manual page 12

Putting the Set 830 S into operation
Connecting the transmitter to a headphone socket
A
J
Adjust the volume of the headphone socket on your
sound source to a medium level.
This improves the quality of cordless sound transmission.
For detailed information, please refer to the instruction
manual of your sound source (e.g. TV).
Note:
With most TVs, the headphone socket is located at the
front or sides.
Connecting the transmitter to an RCA socket
B
K
Notes:
– With most TVs, the RCA socket is located at the rear.
– If your TV has several RCA sockets, use the socket
output.
8
Plug the other end of the connection
I
cable
I
on your sound source.
Is the plug on the connection cable
too small for the headphone socket?
Plug the adapter to ¼" (6.3 mm) jack
J
socket
Plug the adapter for RCA
socket
cable
I
Connect the red connector of
the adapter
socket
Connect the white connector of
the adapter
or black RCA socket
sound source.
into the head-phone socket
onto the connection cable.
K
onto the connection
I
.
K
to the red RCA
R of your sound source.
K
to the white
L of your
RCA