Advertisement
Quick Links
What's in the box?
In addition to this guide, the package includes the following items:
iSOS-309-IP65
SP-S2-DS
(iSOS-309-IP65/S2 only)
Technical Support
service@icpdas.com
www.icpdas.com
For Desktop Web
iSOS-309-IP65 Series Quick Start
Model Name
Screw Driver
Resources
How to search for drivers, manuals and
spec information on the ICP DAS website.
For Mobile Web
Model Name
v1.00, November. 2023
CA-014 cable
M12A-2P-IP67
(iSOS-309-IP65/S2 only)
P1
Advertisement
Related Manuals for ICP DAS USA iSOS-309-IP65 Series
Summary of Contents for ICP DAS USA iSOS-309-IP65 Series
- Page 1 Series Quick Start v1.00, November. 2023 What’s in the box? In addition to this guide, the package includes the following items: iSOS-309-IP65 Screw Driver CA-014 cable SP-S2-DS M12A-2P-IP67 (iSOS-309-IP65/S2 only) (iSOS-309-IP65/S2 only) Resources How to search for drivers, manuals and Technical Support spec information on the ICP DAS website.
- Page 2 Appearance iSOS-309-IP65 ○ Number Instructions ○ Waterproof connector ○ Emergency button Build in whip antenna ○ LED indicator Power switch ○ Switch for communication ○ parameter setting Boot button ○ SP-S2-DS Number Instructions DSC module Wall mount ○ Magnetic mount Power connector ○...
- Page 3 Switch / Button / Connector Connector Define Switch Instructions Power on Power off Button Instructions Hold on button for 3 more seconds to Boot boot up device Wake Manual wake up...
-
Page 4: Communication Parameters
Communication parameters Name Instructions Reserved Pins Period □ □ □ 1 second TX Duty ■ □ □ 10 seconds (RF transmission duty) □ ■ □ 30 seconds ■ ■ □ 60 seconds ■：ON □ □ ■ 3 minutes □：OFF ■ □... - Page 5 Instructions Name Node Node □ □ □ □ □ □ □ □ □ ■ ■ □ □ □ □ ■ □ □ □ ■ □ ■ □ □ □ □ ■ □ □ ■ ■ ■ □ □ □ ■ ■...
- Page 6 Connecting the iSOS-309-IP65 and SP-S2-DS Connect the V+ pin of SP-S2-DS to "+" terminal on ExtPWR connector of iSOS-309-IP65, and connect the V- pin to the "-" terminal.
- Page 7 Installing a waterproof connector on SP-S2-DS Step 1: Feed the end of the two core power cable through the Sealing nut, Seal, Clamp Ring, Gasket and Lock Nut. Step 2: Insert two conductors into the holes on the Cord Connector. See the table below for the correct pin-out connections.
- Page 8 Step 4: Wrap the Clamp Ring around the Cord Connector. Step 5: Insert the Seal into the Clamp Ring. Step 6: Push the Sealing Nut forward and Hand-tighten it to seal the assembly. Step 7: Wrap the O-Ring around the Cord Connector.
Need help?
Do you have a question about the iSOS-309-IP65 Series and is the answer not in the manual?
Questions and answers