1. Manuals
  2. Brands
  3. Taramps Manuals
  4. Computer Hardware
  5. PRO 2.4D DYNAMIC LIMITER RMS + PEAK
  6. Instruction manual

Taramps PRO 2.4D DYNAMIC LIMITER RMS + PEAK Instruction Manual

Hide thumbs

Advertisement

Table of Contents

The installation of this product must be made by a qualified professional.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO 2.4D DYNAMIC LIMITER RMS + PEAK and is the answer not in the manual?

Questions and answers

Related Manuals for Taramps PRO 2.4D DYNAMIC LIMITER RMS + PEAK

Summary of Contents for Taramps PRO 2.4D DYNAMIC LIMITER RMS + PEAK

  • Page 1 The installation of this product must be made by a qualified professional.

  • Page 2: Term Of Warranty

    •How to set the alignment parameter value Term of warranty TARAMPS, located on Julio Budisk highway, SN, KM 30 – Alfredo Marcondes, SP - Brazil, ZIP CODE 19180-000, warrants this product against any defects on terms of project, making, assembling, and/or with solidarity, due to project vices which cause it improper or inadequate to its original use within 12 months from the date of purchase.

  • Page 3: Safety Requirements

    Failure to heed the instructions will result in risk of injury to user or product damage. Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units which were previously produced.

  • Page 4: Processor Overview

    Power supply High Level input connectors LCD Display (B and A) Rotary PRO 2.4 d encoder Input clip TARAMPS LED indicator LED indicators Select / Mute limiter and clip and keys output Signal Input (A & B) Signal output ways 1 ~ 4 RCA signals input: Input for low level / high impedance (RCA) signals.
  • Page 5 PRO 2.4 d MAIN MENU Audio TARAMPS Click Menu & parameters navigation Use the encoder, turning left (decrement) or right (increment). Menu selection, option or parameter change can be done by pressing the center of the encoder.

  • Page 6: Audio Routing

    Menu structure & Description 6-Contraseña / Bloqueo Press the encoder button (center – long press) to back to Main Screen. 1- Audio menu: Adjusts and controls related to audio processing: I / O Crossover Equalizer mAIN MENU Rou ng Audio Turn Turn Turn...
  • Page 7 -Band equalizer: It has 5 lters of equalization, with attenuation /boost of up to 12dB, adjustable Q factor, 2 octaves, but center frequencies which can be changed up to 2/3 octave. Acts simultaneously on inputs A and B. The Pro 2.4D has 12 preset equalization curves, selectable in MAIN MENU > Presets EQ. +12dB EQ filter Gain...
  • Page 8 Delay: Set the delay to be applied to audio signal, for systems alignment. The position of transducer's voice coil should be taken in account in order to set the optimal delay value. Selected Output DELAY ----> OUT1 0. 0cm 0. 000ms Delay me Distance Rotate the rotary encoder to set the delay amount to be applied.
  • Page 9 -Phase: Allows inverting the phase of the channel output signal, selecting option [180].Select the channel using the OUT1 to OUT4 selection keys and select the desired phase by turning the encoder. PHASE CONTROL OUT1 [0] 180 Phase Selected output Reverse polarity Input Output Input...

  • Page 10: Output Level

    Limiter in PEAK function: Limiter that acts with reference to the PICO value of the audio signal, prevents mechanical damage and overheating of the speakers due to excessive displacement. Selected output PEAK OUT1 MANUAL PEAK func on Manual or automa c mode Dynamic: 24dB Parameter...
  • Page 11 -) Audio Generator: Sine wave generator, with frequency and variable amplitude. With 4 modes: - Fixed Frequency: Sine generator with frequency (10Hz to 22KHz) and amplitude (-60dB to 0dB) adjustments. Note that when activating the generator, the signal is sent to all outputs and it is possible to adjust the other functions and parameters in real time, since the generator remains active and de ned as a signal source when in the ON position, even when accessing another function.
  • Page 12 5-) Load con g: Load a previously saved con guration or the factory default setting. Rotate the encoder to select the desired memory, click on the center of the encoder to select and then con rm. Important: when you select the FACTORY SETTINGS option, the previously saved settings will be lost.
  • Page 13 Connecting processor inputs & outputs Head Units For connec on in amplifiers Cable Remote 0,50mm² (20 AWG) RCA output Wires cable PRO 2.4 d TARAMPS RCA Cable Taramps TS 400X4 TS 400X4 AMPLIFIER 400WATTS - 2 OHMS AMPLIFIER 400WATTS - 2 OHMS Compression driver Check power polarity and recommended gauge.

  • Page 14: Technical Features

    Technical features Processing Resolu on......................24bits Sampling rate....................48KHz Inputs and Outputs: Number of input channels..................2 Number of output channels..................4 Input/output rou ng:................. A, B, A+B Master gain adjustment:................-80 a 0dB Output gain adjustment:.................-45 a +15dB Input impedance (RCA):................10K ohms Input impedance (high level):..............50 ohms Output impedance...:...................47 ohms Maximum input level (RCA):............
  • Page 15 Manufactured by: TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Highway: Julio Budisk, SN, KM 30 Alfredo Marcondes - SP Made in Brazil...

Table of Contents