Taramps PRO 2.4S Instruction Manual
  1. Manuals
  2. Brands
  3. Taramps Manuals
  4. Computer Hardware
  5. PRO 2.4S
  6. Instruction manual

Taramps PRO 2.4S Instruction Manual

Digital audio processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

The installation of this product must be made by a qualified professional.

Advertisement

Table of Contents
loading

Related Manuals for Taramps PRO 2.4S

Summary of Contents for Taramps PRO 2.4S

  • Page 1 The installation of this product must be made by a qualified professional.

  • Page 2: Term Of Warranty

    12 months from the date of purchase. In case of defect during the warranty period, TARAMPS responsibility is limited to the repairing or substitution of the device of its own making.

  • Page 3: Safety Requirements

    Taramps reserves the right to modify the contents of this document at any me without prior no ce and does not have the obliga on to apply the changes in units which were previously produced.

  • Page 4: Processor Overview

    Choose the >PORTUGUES desired language and confirm with a quick touch in the center of the encoder. Turning the encoder knob (clockwise or counterclockwise), adjusts the master volume (Input volume). PRO 2.4 S TARAMPS...
  • Page 5 PRO 2.4 S MAIN MENU Audio TARAMPS Click Menu & parameters navigation Use the encoder, turning le (decrement) or right (increment). Menu selec on, op on or parameter change can be done by pressing the center of the encoder.

  • Page 6: Audio Routing

    Menu structure & Description 6-Contraseña / Bloqueo Press the encoder bu on (center – long press) to back to Main Screen. 1- Audio menu: Adjusts and controls related to audio processing: I / O 15 Band Equalizer In Parametric EQ mAIN MENU Rou ng...
  • Page 7 -Band equalizer: It has 15 bands of equaliza on, with a enua on /boost of up to 12dB, at the center frequencies defined in the ISO standard (25 to 16KHz, 2/3 octave). Acts simultaneously on inputs A and B. The Pro 2.4S has 12 preset equalizers, selectable in MAIN MENU > Presets EQ. EQ. GRAFICO f: 25Hz +0.0dB...
  • Page 8 Delay: Set the delay to be applied to audio signal, for systems alignment. The posi on of transducer's voice coil should be taken in account in order to set the op mal delay value. Selected Output DELAY ----> OUT1 0. 0cm 0.
  • Page 9 -Phase: Allows inver ng the phase of the channel output signal, selec ng op on [180].Select the channel using the OUT1 to OUT4 selec on keys and select the desired phase by turning the encoder. PHASE CONTROL OUT1 [0] 180 Phase Selected output Reverse polarity...

  • Page 10: Output Level

    -Output level: Set the level for each output way. Allow apply up to +15dB gain or -45dB a enua on. Select the desired way using the OUTx (1-4) Keys. OUTPUT LEVEL OUT1: 0.0dB Selected output Output level Note: This func on can be accessed outside the menu by simply pressing the corresponding output key when in the main screen.
  • Page 11 -) Audio Generator: Sine wave generator, with frequency and variable amplitude. With 4 modes: - Fixed Frequency: Sine generator with frequency (10Hz to 22KHz) and amplitude (-60dB to 0dB) adjustments. Note that when ac va ng the generator, the signal is sent to all outputs and it is possible to adjust the other func ons and parameters in real me, since the generator remains ac ve and defined as a signal source when in the ON posi on, even when accessing another func on.
  • Page 12 This will erase the contents of user se ngs memories and reset the product to ini al setup. 7-) Presets EQ: The Pro 2.4S has 12 preset equalizers. Select the music style and press the encoder center to apply the equaliza on curve: •ELECTRONIC...
  • Page 13 INPUT CLIP OUT CLIP OUT CLIP OUT CLIP OUT CLIP INPUTS RCA Cable Taramps TS 400X4 TS 400X4 AMPLIFIER 400WATTS - 2 OHMS AMPLIFIER 400WATTS - 2 OHMS Compression driver Check power polarity and recommended gauge. CUIDADO it is recommended to install a 1 Ampere fuse on the positive supply terminal.

  • Page 14: Technical Features

    Technical features Processing Resolu on......................24bits Sampling rate....................48KHz nputs and Outputs: Number of input channels..................2 Number of output channels..................4 Input/output rou ng:................. A, B, A+B General gain adjustment:................-80 a 0dB Output gain adjustment:.................-45 a +15dB Input impedance (RCA):................10K ohms Input impedance (high level):..............50 ohms Output impedance...:...................47 ohms Maximum input level (RCA):............
  • Page 15 Fabricado por / Manufactured by: TARAMPS ELECTRONICS LTDA CNPJ / TAX ID: 11.273.485/0001-03 R. João Silvério, 121 • Res. Manoel Martins Alfredo Marcondes - SP Indústria Brasileira - Made in Brazil...

Table of Contents