Subscribe to Our Youtube Channel
Related Manuals for Ruijie Reyee RG-ANT13-360
Summary of Contents for Ruijie Reyee RG-ANT13-360
- Page 1 Ruijie Reyee RG-ANT13-360 Antenna Hardware Installation and Reference Guide Document Version: V1.0 Date: 2024.02.06 Copyright © 2024 Ruijie Networks...
- Page 2 All rights are reserved in this document and this statement. Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks is prohibited.
-
Page 3: Preface
Preface Audience This document is intended for: Network engineers Technical support and servicing engineers Network administrators Technical Support Official website of Ruijie Reyee: https://www.ruijienetworks.com/products/reyee Technical Support Website: https://ruijienetworks.com/support Case Portal: https://www.ruijienetworks.com/support/caseportal Community: https://community.ruijienetworks.com ... - Page 4 Note An alert that contains additional or supplementary information that if not understood or followed will not lead to serious consequences. Specification An alert that contains a description of product or version support. Note This document provides the installation steps, troubleshooting, technical specifications, as well as the specifications and use guidelines of cables and connectors.
-
Page 5: Table Of Contents
Contents Preface ..............................I 1 Product Introduction ........................... 1 1.1 Overview ............................ 1 1.2 Package Contents........................1 1.3 Product Appearance ........................1 1.3.1 Appearance ........................1 1.3.2 Antenna Connectors ...................... 3 1.4 Technical Specifications ......................3 1.5 Power Supply Technical Specifications ..................5 2 Preparing for Installation ........................ - Page 6 3.2 Before You Begin ........................9 3.3 Safety Precautions During Installation ..................10 3.4 Installation Procedures ......................10 3.4.1 Installing the Wireless Bridge ..................10 3.4.2 Removing the Wireless Bridge ..................12 3.4.3 Installing the Antenna....................14 3.5 Connecting Cables........................15 3.6 Verifying the Installation ......................
-
Page 7: Product Introduction
Product Introduction Overview The RG-ANT13-360 antenna is an external omnidirectional antenna launched by Ruijie Reyee for outdoor wireless bridges. This antenna, featuring the 5 GHz 2x2 MIMO technology and two spatial streams, delivers a gain of up to 13 dBi, with a horizontal angle of 360° and a vertical angle of 7° . It is specifically designed for the RG-AirMetro550G-B bridge for point-to-multipoint (PTMP) scenarios, covering a range of up to 2 km. - Page 8 Hardware Installation and Reference Guide Product Introduction Back View...
-
Page 9: Antenna Connectors
Hardware Installation and Reference Guide Product Introduction 1.3.2 Antenna Connectors Figure 1-2 Antenna Connectors Table 1-2 Antenna Connectors Mark Component Description Antenna path 1 connector Antenna path 2 connector Technical Specifications Note The weight in the table refers to the weight of a single antenna. - Page 10 Hardware Installation and Reference Guide Product Introduction Table 1-3 Technical Specifications Dimensions (W 769 mm × 120 mm × 81.6mm (30.3 in. x 4.7 in. x 3.2 in.) (excluding mounting × D × H) bracket) Weight 2.35kg(5.18 lb) Frequency 5.15 to 5.85 GHz Range Gain 13 dBi...
-
Page 11: Power Supply Technical Specifications
Warning To power the device using DC power, use a 12 V/1.0 A DC power adapter that is supplied by Ruijie Reyee. Please note that the DC power adapter is not included and needs to be acquired separately from ... -
Page 12: Preparing For Installation
Hardware Installation and Reference Guide Preparing for Installation Preparing for Installation Safety Precautions Note To prevent device damage and physical injury, please read carefully the safety precautions described in this chapter. The following safety precautions do not cover all possible dangers. 2.1.1 General Safety Precautions ... -
Page 13: Installation Environment Requirements
Hardware Installation and Reference Guide Preparing for Installation Installation Environment Requirements To ensure the normal operation and prolonged service life of the device, it is essential to install it indoors in a location that meets the following requirements. 2.2.1 Environment ... -
Page 14: Anti-Interference
Hardware Installation and Reference Guide Preparing for Installation 2.2.4 Anti-Interference Take interference prevention measures for the power supply system. Keep the device away from the grounding facility or lightning and grounding facility of the power device as much as possible. ... -
Page 15: Installation
Hardware Installation and Reference Guide Installation Installation Caution Before installing the device, make sure that you have carefully read the requirements described in Chapter 2. Installation Procedure Before You Begin Carefully plan and arrange the installation location, networking mode, power supply, and cabling of the device before installation. -
Page 16: Safety Precautions During Installation
Hardware Installation and Reference Guide Installation Safety Precautions During Installation To ensure minimal interference when installing multiple wireless bridges in close proximity, maintain a horizontal installation distance of at least 2 meters, or a vertical installation distance of at least 0.5 meters between each wireless bridge. - Page 17 Hardware Installation and Reference Guide Installation (2) Attach the wireless bridge to the antenna. (3) Connect the SMA connector of the wireless bridge to that of the antenna.
-
Page 18: Removing The Wireless Bridge
Hardware Installation and Reference Guide Installation (4) Install the protective cover. 3.4.2 Removing the Wireless Bridge (1) Remove the protective cover by pulling it upward. (2) Unscrew the RF cable. - Page 19 Hardware Installation and Reference Guide Installation (3) Remove the wireless bridge by pulling it upward and then outward. (4) Remove the RF cable.
-
Page 20: Installing The Antenna
Hardware Installation and Reference Guide Installation 3.4.3 Installing the Antenna Note You are advised to use the following three Ruijie antenna models: RG-ANT20S-90, RG-ANT16S-120, and RG- ANT13-360. Installing a 360° antenna (1) Secure the antenna to the pole. Note... -
Page 21: Connecting Cables
Hardware Installation and Reference Guide Installation (2) The installation is complete. Connecting Cables (1) Use or make an Ethernet cable based on the distance between the wireless bridge and the power source. The device supports PoE power supply over Cat5e or better cables with a cable length up to 100 meters (328 ft.). -
Page 22: Verifying The Installation
Hardware Installation and Reference Guide Installation Figure 3-1 Cable Connection Warning After the Ethernet cable is securely connected to the device, cover the device with a waterproof cover to shield it from potential water and dust damage. Do not use other models of PoE adapters or switches for power supply as it may lead to irreparable damage to the device. -
Page 23: Debugging
Hardware Installation and Reference Guide Debugging Debugging Setting Up the Configuration Environment Before setting up the configuration environment using the 24 V, 0.5 A PoE power supply or the 12 V DC power supply, verify that the power cord is properly connected and that the configuration environment meets safety requirements. -
Page 24: Monitoring And Maintenance
Monitoring and Maintenance Hardware Installation and Reference Guide Monitoring and Maintenance Monitoring You can observe the LED status to monitor the device in operation. Hardware Maintenance If the hardware is faulty, please contact Ruijie Networks technical support for assistance. -
Page 25: Common Troubleshooting
Hardware Installation and Reference Guide Common Troubleshooting Common Troubleshooting Troubleshooting Flowchart... -
Page 26: Appendix
Hardware Installation and Reference Guide Appendix Appendix Connectors and Media 1000BASE-T/100BASE-TX/10BASE-T Port The 1000BASE-T/100BASE-TX/10BASE-T port is a 10/100/1000 Mbps auto-negotiation port that supports auto MDI/MDIX Crossover. Compliant with IEEE 802.3ab, the 1000BASE-T port requires Category 5e 100-ohm UTP or STP (recommended) with a maximum distance of 100 meters (328 feet). - Page 27 Hardware Installation and Reference Guide Appendix The following figure shows feasible connections of the straight-through and crossover twisted pair cables for a 100BASE-TX/10BASE-T port. Figure 7-2 100BASE-TX/10BASE-T Twisted Pair Connections Straight-Through Crossover Switch Adapter Switch Switch...
Need help?
Do you have a question about the Reyee RG-ANT13-360 and is the answer not in the manual?
Questions and answers