Source SRS-PIR Installation Manual

If the sensitivity is poor:
• Please check if there is anything in front of the detection window that is hindering the
product receiving signals.
• Please check the ambient temperature.
• Please check if the signal's source is in the detection fields.
• Please check the installation height (2.2m - 4m).
If the sensor can't shut the load automatically, check the following:
a. Are there are continuous signals in the detection fields?
b. Is the time delay is set to the longest field?
c. Does the power correspond to the instruction?
d. Is there a temperature change source near the sensor? (air conditioning/
central heating etc.)
Product end of life instruction.
This product is in the scope of EU 2019/2020 directive on Waste Electrical and Electronic Equipment
(WEEE). This product must be disposed according to the legislation. This document is intended for use by
end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of
life treatment for the components and materials of the product. Please follow pictured diagram on the back
of this manual showing how to dismantle the product into different components which should be disposed
correctly. These components would consist of plastic, metal and electronic materials. It is the responsibility
of the end user to dispose of this product correctly. www.weeeireland.ie or contact your local council for
further information.
Unit 7/8 Ashbourne Business Centre, Ballybin Road, Ashbourne, Co. Meath, Ireland, A84 YP58,
Phone: 00353 1 835 7447
Unit 32 Junction One Business Park, Valley Road, Birkenhead, Merseyside, UK, CH41 7ED,
0330 551 7000
UK Ph:
Website: www.sgd.ie
IP20
COMPLIANT
Installation Manual
Infrared motion sensor
1Xdetector
s year
Quality
Assurance
PIR Motion Sensor
Product Code: SRS-PIR
Manual
ES-P41B