Advertisement
Quick Links
TROUBLESHOOTING
If the load does not work:
a. If the connection-wiring of power and load is incorrectly installed.
b. If the load is incorrectly set up.
c. if the working light set is not corresponding to ambient light.
If the sensitivity is poor:
a. Is there is an obstacle in front of the detection window that is
affecting the signal?
b. Is the ambient temperature too high?
c. Is the induction signal source in the
d. Is the installation height corresponding to the height shown in the
instructions.
e. Is the moving orientation correct?
The sensor cannot shut off the load automatically:
a. If there is a continuous signal in the detection
b. If the time delay is too long.
c. If the power corresponds to the instructions.
d. If the temperature near the sensor changes, (caused by air
conditioning or central heating).
For more information contact:
Unit 7/8 Ashbourne Business Centre, Ballybin Road, Ashbourne, Co. Meath,
A84 YP58, Ireland
Phone:
+353 1 835 7447,
of detection?
UK Ph:
Website:
www.sgd.ie
0330 551 7000,
3 in 1 Infrared Motion Sensor
Product Codes:
SPIR 3MOD-WH
SPIR 3MOD-BL
Corner
Wall
IP54
Compliant
INSTALLATION MANUAL
Ceiling
111.5mm
78mm
Advertisement
Related Manuals for Source SPIR 3MOD-WH
Summary of Contents for Source SPIR 3MOD-WH
- Page 1 Is there is an obstacle in front of the detection window that is affecting the signal? b. Is the ambient temperature too high? Product Codes: c. Is the induction signal source in the of detection? SPIR 3MOD-WH d. Is the installation height corresponding to the height shown in the SPIR 3MOD-BL instructions.
- Page 2 There should be no obstacles or moving objects in front of the detection function of power and detection indication. windows as it will affect detection. SPECIFICATION: CONNECT-WIRE FIGURE Power Source: 220V/AC-240V/AC Detection Range: 180º+360º Power Frequency: 50/60Hz Working Temperature: -20~ +40°C Ambient Light:<10-2000LUX (adjustable) Working Humidity: <93%RH...
- Page 3 Declaration Number: 082-SPIR 3MOD-WH,082-SPIR 3MOD -BL This declaration of conformity is issued under the sole responsibility of the manufacturer. Products: Infrared Motion Sensor Model Number: SPIR 3MOD -WH, SPIR 3MOD-BL The product/model of the declaration described above is in conformity with the relevant...
Need help?
Do you have a question about the SPIR 3MOD-WH and is the answer not in the manual?
Questions and answers