12-15 grams of steam per minute, with anti-drip and anti-calc functions. Here at Lakeland, our award-winning family-owned business still offers the same excellent quality, value for money and exceptional customer service as when we founded the company back in the 1960s.
Lakeland Customer Services team on 015394 88100 or info@lakeland.co.uk • Do not use this appliance if the lead is damaged. Contact the Lakeland Customer Service team on 015394 88100 or info@lakeland.co.uk • Always use the appliance on a dry, level, heat resistant surface. Do not allow the power cord to touch hot surfaces or the steamer panel.
Page 5
• Always ensure that your hands are dry before removing the plug from the mains socket. Never pull the plug out of the mains socket by its lead. • To avoid injury or possible fire, do not cover the appliance when in use. •...
USING YOUR GARMENT STEAMER FOR THE FIRST TIME • Unpack the Garment Steamer, remove all the packaging materials. • Unwind the power cord. BUILDING THE STAND • Place the base unit of the stand on a dry, flat, level surface. •...
Page 7
FILLING THE WATER TANK • For best results, always make sure there is plenty of water in the tank when steaming • Only use tap water or cooled boiled water in the water tank. DO NOT add perfume, vinegar, chemically descaled water or any other substances into the water tank. •...
Page 8
ANTI-CALC SYSTEM • There is a special resin filter inside the water tank, which softens the water and prevents limescale build-up in the steamer panel. The resin filter is permanent and does not need replacing. • DO NOT add perfume, vinegar, chemically descaled water or any other substances into the water tank.
INSTRUCTIONS FOR USE This steamer should not be used on fabrics that cannot be steamed. If you are unsure, test the steamer on the inside of the hem of the garment or a discreet area of the item to ensure that it will not damage the fabric. Fabrics with these symbols can be steamed, * + ^ for example, Polyester, Silk, Viscose, Wool,...
Page 10
ATTACHING PLATES • To attach the plates, place over the steamer panel until you hear it click into place, it is easier to attach at the top first. • To avoid injury, DO NOT fit the plates whilst the appliance is turned on or hot. STAINLESS STEEL PLATE •...
Page 11
EDGE FINSIHING CLIP • The edge finishing clip can be used to create a sharp edge to material and garments, e.g. down the front of trousers, on collars or shirt/blouse fronts. • Place the material/clothes between the edge finishing clip and the steamer panel. •...
AUTO SHUT-OFF • The indicator light will flash red to show the Garment Steamer is in ‘Auto Shut-Off’ mode. • The Garment Steamer will automatically switch on when steam button is pressed. • The indicator light will come on and flash green until the Garment Steamer has reached temperature again.
Check that the on/off switch is switched to on. If the steamer is still not working, contact Lakeland Customer Services. Question: Why is no steam coming out of the steamer? Answer: There may not be enough water in the water tank, see ‘Filling the Water...
CARE AND CLEANING • Switch off and unplug the steamer, and let it cool completely before cleaning. • Remove the water from the water tank. • Clean thoroughly before using for the first time and after every use. • The outside of the steamer can be wiped with a clean damp cloth, dry thoroughly before storing.
TECHNICAL INFORMATION • Power: 1500W. • Voltage: 220-240V~. • Frequency: 50/60Hz. • Flex length approx. 170cm. (67”). • Weight of product: 1.5kg. ELECTRICAL CONNECTIONS THIS APPLIANCE MUST BE EARTHED The appliance is fitted with a fused three-pin plug to BS1363 which is suitable for use in all homes fitted with sockets to current specifications.
Page 16
Lakeland Alexandra Buildings, Windermere, Cumbria, UK LA23 1BQ Tel: +44(0)15394 88100 lakeland.co.uk...
Need help?
Do you have a question about the 53451 and is the answer not in the manual?
Questions and answers