Related Manuals for DRONE ART RC EYE Imprimo
Summary of Contents for DRONE ART RC EYE Imprimo
- Page 1 RC EYE Imprimo Operating instructions 88028RC / 88029RC / 88030RC / 88031RC 88034RC / 88035RC...
- Page 2 Please download the latest version of the operating instructions from our website at https://www.droneart.com/downloads/. Bitte laden Sie die neueste Ausgabe der Bedienungsanleitung von unserer Website https://www.droneart.com/downloads/ herunter.
-
Page 3: Table Of Contents
1. Table of Contents 2. Introduction................5 3. Intended use................6 4. Tools required ................7 5. Delivery content................ 7 6. Assembly ................11 ▪ What can I build? .............. 11 ▪ How to assemble your version? ........11 7. Charging the flight battery ............32 8. - Page 4 ▪ Outdoor flying locations ............ 39 ▪ Miscellaneous ..............40 14. Safety instructions – Batteries ..........40 ▪ General information ............40 ▪ LiPo batteries ..............40 ▪ Hazards of LiPo flight batteries ......... 41 ▪ Total discharge ..............43 ▪ Correct dimensioning ............43 15. Accident prevention ..............44 16.
-
Page 5: Introduction
Please keep these instructions for future reference! All company names and product designations contained herein are trademarks of the respective owners. All rights reserved. We wish you a great deal of enjoyment with your new Drone Art product! -
Page 6: Intended Use
3. Intended use The Imprimo is a model quadcopter solely designed for private use in the model making area and the operating times associated with this. The Imprimo is not suitable for other types of use, including commercial applications. This product is not a toy and not suitable for children under the age of 14. For safety and approval purposes, you must not rebuild and/or modify this product. -
Page 7: Tools Required
4. Tools required 1x Spanner 4 mm (not supplied) 1x Hex wrench (supplied) 1x Cross-head screwdriver (not supplied) Threadlocker (not supplied) 5. Delivery content Carefully inspect the delivery contents to ensure you have all the parts shown in the corresponding section. Should you have anything missing please contact us via https://www.droneart.com/help-and-support for product support. - Page 8 1x Canopy A 1x Canopy B 1x Canopy C 1x Bottom B 1x Rear lock 1x Front lock 2x Rubber band mount 1x Bottom (A) VTx plastic tray 1x HD cam bracer 1x Protective cap Imprimo FPV Imprimo FPV-HD 1x HD VTx with microSD card slot 1x HD Cam 1x Wire (HD VTx use)
- Page 9 6x M2 Nut 6x PB 1.7x5 10x PM 2x5 10x PM 2x5 8x PM 2x6 (Aluminium) (aluminium) (aluminium) 4x Spacer 8x Silicone O-ring 16x CM 2x6 Hex 8x PM 2x8 4x PM 2x12 4x PM 2x14 2x Propeller (CW) 2x Propeller (CW) 2x Propeller (CCW) 2x Propeller (CCW) clear red...
- Page 10 1x Silicone anti-slip mat 1x Foam tape 3x Rubber band 1x USB charger 1x Extension cable 1x Hex wrench for USB charger 1x 300 mAh 2S Battery Body frame x1...
-
Page 11: Assembly
6. Assembly What can I build? Study below table summary and diagram on page 12. Imprimo Imprimo FPV Imprimo FPV-HD (88030RC/88031RC) (88034RC/88035RC) (88028RC/88029RC) Non-FPV 1080P recording How to assemble your version? The following pages will guide you through the necessary steps to assemble your version. Every version starts at step on page 13. - Page 12 Imprimo Imprimo FPV Imprimo FPV-HD...
- Page 13 This step instructs you how to disassemble the flight controller and ESC board module. Flight Follow the diagram on the right hand side. controller Board...
- Page 14 Silicone O-ring x 4 Body frame PM 2x12 screw x4...
- Page 15 Spacer x 4 FPV-HD (FPV version) only Power wire indicates Guide the VTx cable front of Imprimo through the frame...
- Page 16 M2 nut x4 Silicone O-ring x4 Carefully align pins with socket before connecting! Flight controller FPV-HD (FPV version) only Guide the receiver antenna through the frame opening. The screw tip shall be slightly below the nut’s surface, but at least more than half way into the nut.
- Page 17 Use PM2x5 steel screws to install the motors. Apply threadlocker. Optionally, you can use the aluminium screws to lower the overall weight. Note that the aluminium screws are not meant for prolonged use and not as resistant as the steel screws.
- Page 18 FPV-HD (FPV) Imprimo Imprimo FPV Imprimo FPV-HD Version Continue at FS-1 FH-1 Page...
- Page 19 Canopy C M2x5 screw x2 (Non-FPV) Rear lock Bottom (B) Front lock Continue at M2 nut x2 Page...
- Page 20 FS-1 FS-1 Guide the camera cable through the canopy opening Camera: Use your own suitable camera. Refer to Imprimo FPV. Canopy B Cut and stick a piece of foam tape onto the canopy seat...
- Page 21 FS-2 FS-2 M2x5 screw x2 Connect VTx cable FPV (FPV) Front lock Rear lock Bottom (B) M2 nut x2 Continue at Page...
- Page 22 FH-1 FH-1 PB1.7x5 Self tapping screw HD cam bracer HD cam Canopy A...
- Page 23 FH-2 FH-2...
- Page 24 FH-3 FH-3 HD VTx module microSD card slot...
- Page 25 FH-4 FH-4...
- Page 26 FH-5 FH-5 VTx plastic tray Use the foam tape to stick the VTx board to the plastic tray. Route the VTx antenna inside the tray and exit as shown.
- Page 27 FH-6 FH-6 M2x5 screw x2 We recommend you glue the M2 nut x2 protective cap in place.
- Page 28 FH-7 FH-7 Rear lock Front lock Continue at Page...
- Page 29 FPV-HD (FPV version) displayed in illustration CM2x6 Instead of the CM2x6 steel screws, you can use the aluminium screws to lower the overall weight. Note that the aluminium screws are not meant for prolonged use and not as resistant as the steel screws.
- Page 30 FPV-HD (FPV version) displayed in illustration Silicon anti-slip mat...
- Page 31 FPV-HD (FPV version) displayed in illustration Secure flight battery Only connect after you have with rubber band turned on the remote control Turn on the remote control before you connect the battery to the quadcopter and disconnect the battery from the quadcopter before you turn off the remote control.
-
Page 32: Charging The Flight Battery
7. Charging the flight battery 1. Connect the flight battery to the supplied USB charger. 2. Connect the charger with a suitable USB power adapter (Do not charge the battery on a computer!). Red indicator light lights up and the green indicator light flashes. 3. When the battery is fully charged, the green indicator light is solid. 4. Disconnect the charger from the power source, then disconnect the battery from the charger. 5. Let the battery cool down for about 10 minutes before you connect it to the quadcopter. Charging... -
Page 33: Binding Your Spektrum/Frsky Protocol Radio
8. Binding your Spektrum/Frsky protocol radio ■ Read the operating instructions of the radio that you intend to use with the product to ensure you understand the binding procedure and how to properly setup your radio. ■ We provide basic setup procedures for a few different radio models on: www.droneart.com 1. -
Page 34: Flight Modes
10. Flight modes The product features 3 flight modes: Flight mode Front LEDs Rear LEDs Mode 1 Orange Blue Mode 2 Green Mode 3 Orange Red – Blue Flight Mode 1: Angle Mode Your stick controls the tilt angle of the quadcopter. When your stick reaches its maximum position the copter will stop and hold there as it has reached the maximum tilt angle allowed. -
Page 35: Vtx Channel Selection - Imprimo Fpv
11. VTx channel selection – Imprimo FPV Band B Band F Band L Band A Band E Band R Button A Short press Flip image by 180° Long press Select NTSC/PAL Button B Short press Select channel Long press (approx. 4 s) Select frequency band Refer to chapter 16. -
Page 36: Vtx Channel Selection - Imprimo Fpv Hd
12. VTx channel selection – Imprimo FPV HD microSD card slot Manual channel button Manual video channel selection 1. Turn quadcopter and transmitter on. 2. Press the manual channel button. The current band and channel will be displayed in the top right corner of the transmitter screen. -
Page 37: Safety Instructions
13. Safety instructions Read the operating instructions carefully and especially observe the safety instructions. If you do not follow the safety instructions and information on proper handling in these operating instructions, we assume no liability for any resulting personal injury or damage to property. -
Page 38: Before Commissioning
■ The product must not become damp or wet. The product uses delicate electronic components which are sensitive to temperature fluctuations and are optimised for a particular temperature range. Observe the operating temperature range given in the technical data. ■ Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product. -
Page 39: Outdoor Flying Locations
■ Improper operation may cause serious injury and property damage! Therefore make sure to keep a sufficiently safe distance to persons, animals or objects during operation. ■ Select an appropriate location for the operation of the product. ■ Fly the product only if your ability to respond is unrestricted. The influence of tiredness, alcohol or medication can cause incorrect responses. ■ Do not direct the product towards spectators or yourself during flight. ■ Motor, electronics and flight battery may heat up during operation. Wait 5 to 10 minutes before recharging or replacing the flight battery. ■ Never switch off the transmitter (remote control) while the product is in use. After landing, always disconnect the flight battery first. Only then may the transmitter be switched off. -
Page 40: Miscellaneous
■ Stay away from power lines, cellphone towers and other sources of potential interference, and restricted areas. ■ Never fly the product above or near people. Miscellaneous ■ Consult an expert when in doubt about operation, safety or connection of the product. ■ Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop. ■ If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel. -
Page 41: Hazards Of Lipo Flight Batteries
In no case must the maximum permissible battery pack temperature of +60°C be exceeded. Otherwise the rechargeable battery may explode! Lithium is a highly reactive chemical element with a high energy density. In the case of overcharging, the LiPo rechargeable battery packs might catch fire or even explode. Therefore, LiPo rechargeable battery packs must always be put on a fire-proof surface for charging and the charging process must be supervised. - Page 42 ■ Only charge intact and undamaged batteries. If the external insulation of the rechargeable battery is damaged or if the rechargeable battery is deformed or bloated, it must not be charged. In this case, there is immediate danger of fire and explosion! ■ Never damage the exterior of a LiPo flight battery. Never cut the covering foil. Never stab any LiPo flight batteries with pointed objects. ■ As the charger and the rechargeable LiPo flight battery both heat up during the charging procedure, it is necessary to ensure sufficient ventilation. Never cover the charger or the LiPo flight battery! ■...
-
Page 43: Total Discharge
■ The general hazard notices for handling batteries and rechargeable batteries also apply to rechargeable LiPo batteries. Total discharge ■ Since discharging below 3.0 V per cell would lead to permanent damage of the rechargeable battery pack, this total discharging is to be prevented as far as possible. ■... -
Page 44: Accident Prevention
15. Accident prevention The best learning experience is provided by pilots who have experience in flying this type of aircraft. Careless operation can cause serious damage and injury. Observe the following: ■ We strongly advise you to refrain from stunts until you master the product in normal flying conditions. -
Page 45: Technical Data
16. Technical data Imprimo Battery ........LiPo Battery 7.4 V, 2s 300mAh (35 – 70c) Flight time ...... m ax. 5 min. (times may vary depending on flight style and weather conditions) Camera ......... FPV: 600TVL HD-FPV: 1080P Memory card ......32 GB (HD-FPV version only) Operating temperature ..+32 to +104 °F (0 °C to +40 °C) Operating environment ..Dry weather conditions Wind conditions ....No wind, light to mild wind Frame size ......75 mm... -
Page 46: Video Transmitter
5785 5765 5745 5733 5752 5771 5790 5809 5828 5847 5866 5740 5760 5780 5800 5820 5840 5860 Transmitter Refer to the operating instructions of the Spektrum, Frsky or Drone Art transmitter that you choose to use with the product. -
Page 47: Disposal
17. Disposal Product Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines. Remove any inserted (rechargeable) batteries and dispose of them separately from the product. -
Page 48: Declaration Of Conformity
Importer: Conrad SE, Klaus-Conrad-Str. 1, D-92240 Hirschau We declare on our own responsibility, that the product: Product description: RC EYE Imprimo Model: 88028RC / 88029RC / 88030RC / 88031RC / 88034RC / 88035RC is in conformity with following directives and standards or regulations: CE - RED Test report + VoC: Article 3.1a –... -
Page 49: Fcc Note
19. FCC Note Caution: This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 50: Product Support
■ Reorient or relocate the receiving antenna. ■ Increase the separation between the equipment and receiver. ■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ■ Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. -
Page 51: Legal Notes
21. Legal notes These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2, Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reflect the current technical specifications at time of print. - Page 52 Please download the latest version of the operating instructions from our website at https://www.droneart.com/downloads/. Bitte laden Sie die neueste Ausgabe der Bedienungsanleitung von unserer Website https://www.droneart.com/downloads/ herunter. © 2018 Drone Art - The Art of Building Drones. ALL RIGHTS RESERVED © 2018. TERMS AND CONDITIONS APPLY.
Need help?
Do you have a question about the RC EYE Imprimo and is the answer not in the manual?
Questions and answers