1. Manuals
  2. Brands
  3. S&T Manuals
  4. Single board computers
  5. Kontron 3.5"-SBC-WLU
  6. User manual

S&T Kontron 3.5"-SBC-WLU User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER GUIDE
3.5"-SBC-WLU
Doc. User Guide, Rev. 1.8
Doc. ID: [To be Determined]
www.kontron.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kontron 3.5"-SBC-WLU and is the answer not in the manual?

Questions and answers

Related Manuals for S&T Kontron 3.5"-SBC-WLU

Summary of Contents for S&T Kontron 3.5"-SBC-WLU

  • Page 1  USER GUIDE 3.5"-SBC-WLU Doc. User Guide, Rev. 1.8 Doc. ID: [To be Determined] www.kontron.com...
  • Page 2 3.5"-SBC-WLU - User Guide, Rev. 1.8 This page has been intentionally left blank www.kontron.com // 2...
  • Page 3 3.5"-SBC-WLU - User Guide, Rev. 1.8  3.5"-SBC-WLU - USER GUIDE Disclaimer Kontron would like to point out that the information contained in this user guide may be subject to alteration, particularly as a result of the constant upgrading of Kontron products. This document does not entail any guarantee on the part of Kontron with respect to technical processes described in the user guide or any product characteristics set out in the user guide.
  • Page 4 3.5"-SBC-WLU - User Guide, Rev. 1.8 Intended Use THIS DEVICE AND ASSOCIATED SOFTWARE ARE NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE OR RESALE FOR THE OPERATION OF NUCLEAR FACILITIES, THE NAVIGATION, CONTROL OR COMMUNICATION SYSTEMS FOR AIRCRAFT OR OTHER TRANSPORTATION, AIR TRAFFIC CONTROL, LIFE SUPPORT OR LIFE SUSTAINING APPLICATIONS, WEAPONS SYSTEMS, OR ANY OTHER APPLICATION IN A HAZARDOUS ENVIRONMENT, OR REQUIRING FAIL-SAFE PERFORMANCE, OR IN WHICH THE FAILURE OF PRODUCTS COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR...
  • Page 5 3.5"-SBC-WLU - User Guide, Rev. 1.8 Revision History Revision Brief Description of Changes Date of Issue Author/ Editor Initial Issue 2020-Feb-26 Add a LPS power supply notice in Sec. 2.1 2020-Mar-31 Add mating connector info 2020-Oct-26 Add extended temperature 2020-Oct-28 Remove extended temperature 2021-Apr-15 Modify USB 3.1 to USB 3.2 Gen 2 per new naming...

  • Page 6: Symbols

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Symbols The following symbols may be used in this user guide DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

  • Page 7: For Your Safety

    3.5"-SBC-WLU - - User Guide, Rev. 1.8 For Your Safety Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation.

  • Page 8: Lithium Battery Precautions

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Lithium Battery Precautions If your product is equipped with a lithium battery, take the following precautions when replacing the battery. Danger of explosion if the battery is replaced incorrectly.  Replace only with same or equivalent battery type recommended by the manufacturer. ...

  • Page 9: Table Of Contents

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Table of Contents Symbols ..........................................6 For Your Safety ........................................7 High Voltage Safety Instructions .................................. 7 Special Handling and Unpacking Instruction ............................7 Lithium Battery Precautions ..................................8 General Instructions on Usage ..................................8 Quality and Environmental Management ..............................

  • Page 10: List Of Tables

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.8. Front Panel Pin Header (FP1 & FP2) ..............................40 7.9. Serial COM1 & COM2 Ports (CN23 & CN22) ............................42 7.10. LVDS Panel Connector (CN24) ................................44 7.11. LVDS Backlight Power Wafer (CN21) ..............................46 7.12.

  • Page 11: List Of Figures

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Table 18: Pin Assignment CN3 ..................................34 Table 19: Pin Assignment SATA1 ................................. 35 Table 20: Pin Assignment CN8 ..................................36 Table 21: Pin Assignment CN16, CN17 ................................ 37 Table 22: Pin Assignment CN11, CN20 ............................... 38 Table 23: Pin Assignment CN10 ..................................
  • Page 12 3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 23: Digital Input / Output Wafer CN2 ............................47 Figure 24: M.2 Key B 2042 Slot M2B1................................ 48 Figure 25: M.2 Key E 2230 Slot M2E1 ................................51 Figure 26: M.2 Key M 2242 / 2280 Slot M2M1 ............................54 Figure 27: Micro SIM Card Holder CN9 ...............................

  • Page 13: 1/ Introduction

    3.5"-SBC-WLU - User Guide, Rev. 1.8 1/ Introduction This user guide describes the 3.5"-SBC-WLU board made by Kontron. This board will also be denoted 3.5"-SBC-WLU within this user guide. Use of this user guide implies a basic knowledge of PC-AT hardware and software. This user guide focuses on describing the 3.5"-SBC-WLU board's special features and is not intended to be a standard PC-AT textbook.

  • Page 14: 2/ Installation Procedures

    3.5"-SBC-WLU - User Guide, Rev. 1.8 2/ Installation Procedures 2.1. Installing the Board ESD Sensitive Device! Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry.  Wear ESD-protective clothing and shoes  Wear an ESD-preventive wrist strap attached to a good earth ground ...

  • Page 15: Chassis Safety Standards

    3.5"-SBC-WLU - User Guide, Rev. 1.8 2.2. Chassis Safety Standards Before installing the 3.5"-SBC-WLU in the chassis, users must evaluate the end product to ensure compliance with the requirements of the IEC60950-1 safety standard:  The board must be installed in a suitable mechanical, electrical and fire enclosure. ...

  • Page 16: 3/ System Specifications

    3.5"-SBC-WLU - User Guide, Rev. 1.8 3/ System Specifications 3.1. System Block Diagram Figure 1: System Block Diagram 3.5"-SBC-WLU www.kontron.com // 16...

  • Page 17: Component Main Data

    3.5"-SBC-WLU - User Guide, Rev. 1.8 3.2. Component Main Data The table below summarizes the features of the 3.5"-SBC-WLU single board computer. Table 1: Component Main Data System Processor  8th Generation Intel® Core™ U-Series Processors  Intel® Celeron® 4000 Series Processors Memory ...

  • Page 18: Environmental Conditions

    3.5"-SBC-WLU - User Guide, Rev. 1.8 System Real Time Clock  Processor integrated RTC Security  TPM 2.0 (Infineon SLB 9665) System Control & Monitoring Front Panel Header  1x Header Reset Button, HDD LED & External Speaker  1x Header for Power Button, Power LED & SM bus ...
  • Page 19 3.5"-SBC-WLU - User Guide, Rev. 1.8  EN 61000-4-6: 2013  EN 61000-4-8: 2009  EN 61000-4-11: 2004 + A1: 2017 FCC Class B  FCC CFR Title 47 Part 15 Subpart B, Class B  ICES-003 Issue 6: 2016 Class B ...

  • Page 20: Processor Support

    3.5"-SBC-WLU - User Guide, Rev. 1.8 3.5. Processor Support The 3.5"-SBC-WLU is designed to support 8th Generation Intel® Core™ / Celeron® U-Series Processors. The BGA CPU is remounted from factory. Kontron has defined the board versions as listed in the following table, so far all based on Embedded CPUs.

  • Page 21: On-Board Graphics Subsystem

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Memory modules have in general a much lower longevity than embedded motherboards, and therefore EOL of modules can be expected several times during lifetime of the motherboard. As a minimum it is recommend using Kontron memory modules for prototype system(s) in order to prove stability of the system and as for reference.

  • Page 22: Table 8: Power Consumption Test Result

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Table 8: Power Consumption Test Result State Maximum Current Draw Boot Into Idle 1.04 A Full Loading 1.36 A Into S3 Mode 60 mA Into S4 Mode 50 mA www.kontron.com // 22...

  • Page 23: 4/ Connector Locations

    3.5"-SBC-WLU - User Guide, Rev. 1.8 4/ Connector Locations 4.1. Top Side Figure 2: Top Side Table 9: Jumper List Item Designation Description See Chapter LVDS Panel Power Selection 7.18.1 LVDS Backlight Control Selection 7.18.2 LVDS Backlight Enable Selection 7.18.3 Integrated CNVi Selection for M2E1 7.18.4 Flash Descriptor Security Override Selection...
  • Page 24 3.5"-SBC-WLU - User Guide, Rev. 1.8 Item Designation Description See Chapter FAN Wafer Activity Indicator Header for M2E1 7.17 +12 V DC Power Input Wafer 7.1.1 +5 V DC HDD / SSD Power Output Wafer Micro SIM Card Holder for M2B1 7.16 CN10 Audio Input / Output Header...

  • Page 25: Rear Side

    3.5"-SBC-WLU - User Guide, Rev. 1.8 4.2. Rear Side Figure 3: Rear Side Table 11: Rear Side Internal Connector Pin Assignment Item Designation Description See Chapter CN21 LVDS Backlight Power Wafer 7.11 CN22 RS232/422/485 COM2 Wafer CN23 RS232/422/485 COM1 Wafer CN24 24-bit / 2-ch LVDS Connector 7.10...

  • Page 26: Connector Panel Side

    3.5"-SBC-WLU - User Guide, Rev. 1.8 4.3. Connector Panel Side Figure 4: Connector Panel Side Table 12: Connector Panel Side Connector List Item Designation Description See Chapter CN12 GbE LAN1 RJ45 Connector CN13 GbE LAN2 RJ45 Connector CN14 USB 3.2 Gen 2 Port 1, 2 Type A Connector CN15 USB 3.2 Gen 2 Port 3, 4 Type A Connector CN18...

  • Page 27: 5/ Connector Definitions

    3.5"-SBC-WLU - User Guide, Rev. 1.8 5/ Connector Definitions The following defined terms are used within this user guide to give more information concerning the pin assignment and to describe the connector's signals. Defined Term Description Shows the pin numbers in the connector Signal The abbreviated name of the signal at the current pin The notation "XX#"...

  • Page 28: 6/ I/O-Area Connectors

    3.5"-SBC-WLU - User Guide, Rev. 1.8 6/ I/O-Area Connectors 6.1. DP++ Connector (CN18 & CN19) The DP++ (Dual-mode DisplayPort) connectors are based on standard DP female port. Figure 5: DP Connector CN18, CN19 Table 13: Pin Assignment DP++ Connector CN18, CN19 Signal Description Note...

  • Page 29: Ethernet Connectors (Cn12 & Cn13)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 6.2. Ethernet Connectors (CN12 & CN13) The 3.5"-SBC-WLU supports two channels of 10/100/1000 Mbit Ethernet, which are based Intel® I219-LM and Intel® I210-AT controller respectively. In order to achieve the specified performance of the Ethernet port, Category 5 twisted pair cables must be used with 10/100 MByte and Category 5E, 6 or 6E with 1 Gbit LAN networks.

  • Page 30: Usb Connectors (I/O Area)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 6.3. USB Connectors (I/O Area) The external I/O connector panel supports two dual USB 3.2 Gen 2 connectors. USB 3.2 Gen 2 ports are backward compatible with USB 2.0. Figure 7: USB 3.2 Gen 2 Connectors CN14 - Top & Bottom, CN15 - Top & Bottom Table 15: Pin Assignment USB 3.2 Gen 2 / USB 2.0 Connectors CN14 - Top &...

  • Page 31: Figure 9: Usb 3.2 High Speed Cable

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 9: USB 3.2 High Speed Cable Filler, optional UTP Signal Pair SDP Signal Pair Braid Jacket Power Ground SDP Signal Pair www.kontron.com // 31...

  • Page 32: 7/ Internal Connectors

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7/ Internal Connectors 7.1. Power Connector Power connector must be used to supply the board with +12 VDC (±5 %). Hot plugging any of the power connector is not allowed. Hot plugging might damage the board. In other words, turn off main supply etc. to make sure all the power lines are turned off when connecting to the motherboard.

  • Page 33: Rtc Battery Power Input Wafer (Bat1)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.1.2. RTC Battery Power Input Wafer (BAT1) The 1x2-pin 1.25 mm pitch RTC battery power input wafer is intended to be connected to the battery. The battery provides power to the system clock to retain the time when power is turn off. Figure 11: RTC Battery Power Input Wafer BAT1 Table 17: Pin Assignment BAT1 Signal...

  • Page 34: Fan Wafer (Cn3)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.2. Fan Wafer (CN3) The 1x4-pin 2.54 mm pitch system fan wafer (CN3) is used for the connection of the fan for the processor or system. Figure 12: Fan Wafer CN3 Table 18: Pin Assignment CN3 Signal Description Note...

  • Page 35: Sata (Serial Ata) Port 0 Connector (Sata1)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.3. SATA (Serial ATA) Port 0 Connector (SATA1) The SATA connector supplies the data connection for the SATA hard disk and is SATA 3.0 compatible. Figure 13: SATA Port 0 Connector SATA1 Table 19: Pin Assignment SATA1 Signal Description Note...

  • Page 36: Hdd / Ssd Power Output Wafer (Cn8)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.4. HDD / SSD Power Output Wafer (CN8) The 1x4-pin 2.0 mm pitch HDD / SSD power output wafer provides power to the SATA hard disk. Figure 14: HDD / SSD Power Output Wafer CN8 Table 20: Pin Assignment CN8 Signal Description...

  • Page 37: Usb Connectors (Internal) (Cn16 & Cn17)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.5. USB Connectors (Internal) (CN16 & CN17) The 10-pin 2.54 mm pitch USB port pin header CN16 & CN17 supports two USB 2.0 ports each. Figure 15: USB 2.0 Port 6, 7 Pin Header CN16, Port 8, 9 Pin Header CN17 Table 21: Pin Assignment CN16, CN17 Signal Description...

  • Page 38: Audio Amp Output Wafer (Cn11 & Cn20)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.6. Audio AMP Output Wafer (CN11 & CN20) The Speaker audio-out interface is available through the 2-pin 2.0 mm pitch wafers CN11 and CN20. These outputs are shared with the audio output (Line-out) signals of the audio pin header CN10. Figure 16: Audio AMP Output Wafer CN11 (Right Channel), CN20 (Left Channel) Table 22: Pin Assignment CN11, CN20 Signal...

  • Page 39: Audio Input / Output Pin Header (Cn10)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.7. Audio Input / Output Pin Header (CN10) The audio input / output pin header provides audio output (Line-Out), audio input (Line-In) and microphone (Mic-In) signals through the 12-pin 2.54 mm pitch wafer CN10. The audio output signals are shared with those of the speaker connectors CN11 &...

  • Page 40: Front Panel Pin Header (Fp1 & Fp2)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.8. Front Panel Pin Header (FP1 & FP2) The 8-pin 2.54 mm pitch front panel pin header FP1 supplies signals for the reset button, storage LED and system warning speaker. The 10-pin 2.54 mm pitch front panel pin header FP2 supplies signals for the power button, power LED, and SM Bus. Figure 18: Front Panel 1 Pin Header FP1 RSTBTN SPKR...
  • Page 41 3.5"-SBC-WLU - User Guide, Rev. 1.8 Signal Description Note system power, and blinks when the system is in sleep mode. Power Button + System power button (+). Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the operating system settings.

  • Page 42: Serial Com1 & Com2 Ports (Cn23 & Cn22)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.9. Serial COM1 & COM2 Ports (CN23 & CN22) The 10-pin 1.25 mm pitch serial COM wafer CN22 and CN23 provide RS232/422/485 connections. Figure 20: Serial COM CN22, CN23 Table 26: Pin Assignment CN22, CN23 RS232 Signal RS422 Signal Half Duplex RS485...
  • Page 43 3.5"-SBC-WLU - User Guide, Rev. 1.8 Signal Description exchange data. Clear To Send, indicates that the modem or data set is ready to exchange data. Data Carrier Detect, indicates that the modem or data set has detected the data carrier. Ring Indicator, indicates that the modem has received a ringing signal from the telephone line.

  • Page 44: Lvds Panel Connector (Cn24)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.10. LVDS Panel Connector (CN24) The 30-pole 1.0 mm pitch JAE connector provides 24-bit, 2-channel LVDS panel connection. Figure 21: LVDS Connector CN24 Table 28: Pin Assignment CN24 Signal Description Note LVDSA_TX0- LVDS Channel A Data 0 differential pair (-) LVDSA_TX0+ LVDS Channel A Data 0 differential pair (+) LVDSA_TX1-...
  • Page 45 3.5"-SBC-WLU - User Guide, Rev. 1.8 Signal Description Note LVDSB_TX3- LVDS Channel B Data 3 differential pair (-) LVDSB_TX3+ LVDS Channel B Data 3 differential pair (+) Ground DDC_DATA DDC channel Data VDDEN Output Display Enable DDC_CLK DDC Channel Clock VPNL * +3.3 V / +5 V panel power supply 500 mA max.

  • Page 46: Lvds Backlight Power Wafer (Cn21)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.11. LVDS Backlight Power Wafer (CN21) The 7-pin 1.25 mm pitch wafer CN21 provides power supply for flat panel and its backlight inverter. Figure 22: LVDS Backlight Power Wafer CN21 Table 29: Pin Assignment CN21 Signal Description Note...

  • Page 47: Digital Input / Output Header (Cn2)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.12. Digital Input / Output Header (CN2) The header CN2 supports 8-bit digital input / output signals to provide powering-on function of the connected devices. Figure 23: Digital Input / Output Wafer CN2 Table 30: Pin Assignment CN2 Signal Description Note...

  • Page 48: Key B 3042 Slot (M2B1)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.13. M.2 Key B 3042 Slot (M2B1) The 3.5"-SBC-WLU supports M.2 modules in format 3042 with Key B. The M.2 specification supports PCIe x1, USB 2.0 and USB 3.2 signals as well as UIM signals connected to Micro SIM card holder CN9. The slot can be used to integrate WWAN communication to the mainboard.
  • Page 49 3.5"-SBC-WLU - User Guide, Rev. 1.8 Signal Description Note Ground USB3.0_RX- USB 3.2 receiver differential pair (-) UIM_RESET* SIM card reset USB3.0_RX+ USB 3.2 receiver differential pair (+) UIM_CLK* SIM card clock Ground UIM_DATA* SIM card data USB3.0_TX- USB 3.2 transmitter differential pair (-) UIM_PWR* SIM card power USB3.0_TX+...
  • Page 50 3.5"-SBC-WLU - User Guide, Rev. 1.8 Signal Description Note SIM_DETECT SIM card detect SUSCLK 32.768 kHz clock supply input +3.3V 3.3 V power supply Ground +3.3V 3.3 V power supply Ground +3.3V 3.3 V power supply * These pins are connected to CN9 Micro SIM card holder directly. www.kontron.com // 50...

  • Page 51: Key E 2230 Slot (M2E1)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.14. M.2 Key E 2230 Slot (M2E1) The 3.5"-SBC-WLU supports M.2 modules in format 2230 with Key E. The M.2 specification supports PCIe x1, USB 2.0 and / or CNVi signals. The slot can be used to integrate WLAN (Wi-Fi or CNVi Wi-Fi) and / or Bluetooth communication to the mainboard.
  • Page 52 3.5"-SBC-WLU - User Guide, Rev. 1.8 Key E* CNVi* Note Signal Description Signal Description UART_TX UART data output RGI_DT RGI bus Tx Ground Ground UART_CTS UART clear to send RGI_RSP RGI bus Rx PET0+ PCIe Lane 0 Tx pair (+) UART_RTS UART request to send BRI_DT...
  • Page 53 3.5"-SBC-WLU - User Guide, Rev. 1.8 Key E* CNVi* Note Signal Description Signal Description WT_D0N CNVio bus Tx Lane 0 (-) WT_D0P CNVio bus Tx Lane 0 (+) Ground Ground WT_CLKN CNVio bus Tx clock (-) +3.3V 3.3 V power supply +3.3V 3.3 V power supply WT_CLKP...

  • Page 54: Key M 2242 / 2280 Slot (M2M1)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.15. M.2 Key M 2242 / 2280 Slot (M2M1) The 3.5"-SBC-WLU supports M.2 modules in format 2242 or 2280 with Key M. The M.2 specification supports PCIe x4 and SATA 3.0 signals. The slot can be used to integrate an M.2 PCIe x4 SSD (NVMe) or M.2 SATA SSD to the mainboard. Figure 26: M.2 Key M 2242 / 2280 Slot M2M1 Table 33: Pin Assignment M2M1 Signal...
  • Page 55 3.5"-SBC-WLU - User Guide, Rev. 1.8 Signal Description Note Ground PERn1 PCIe Lane 1 receiver pair (-) PERp1 PCIe Lane 1 receiver pair (+) Ground PETn1 PCIe Lane 1 transmitter pair (-) PETp1 PCIe Lane 1 transmitter pair (+) DEVSLP Device sleep Ground PERn0 / SATA_B+...
  • Page 56 3.5"-SBC-WLU - User Guide, Rev. 1.8 Signal Description Note PEDET PCIe detect +3.3V 3.3 V power supply Ground +3.3V 3.3 V power supply Ground +3.3V 3.3 V power supply Ground www.kontron.com // 56...

  • Page 57: Micro Sim Card Holder For M.2 Key B (Cn9)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.16. Micro SIM Card Holder for M.2 Key B (CN9) The Micro SIM card holder CN9 is intended to accommodate an Micro SIM card and connected to UIM signals on the M.2 Key B slot. Figure 27: Micro SIM Card Holder CN9 Table 34: Pin Assignment CN9 Signal...

  • Page 58: Key B / M.2 Key E Activity Indicator Header (Cn1 & Cn4)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.17. M.2 Key B / M.2 Key E Activity Indicator Header (CN1 & CN4) The header CN1 is intended to connect M.2 Key B activity LED cable. The pin header CN4 is intended to connect M.2 Key E activity LED cable. Figure 28: M.2 Key B Activity Indicator Header CN1 Table 35: Pin Assignment CN1 Signal...

  • Page 59: Switches And Jumpers

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.18. Switches and Jumpers The product has several jumpers which must be properly configured to ensure correct operation. Figure 30: Jumper Connector For a three-pin jumper (see Figure 29), the jumper setting is designated ‘‘1-2’’ when the jumper connects pins 1 and 2. The jumper setting is designated ‘‘2-3’’...

  • Page 60: Lvds Backlight Control Selection (Jp2)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.18.2. LVDS Backlight Control Selection (JP2) The 2.0 mm pitch "LVDS Backlight Control Selection" jumper (JP2) can be used to select by which mode the brightness level in the LCD panel is controlled. Figure 32: LVDS Backlight Control Selection JP2 Table 38: Pin Assignment JP2 Jumper 1 Position Description...

  • Page 61: Integrated Cnvi Selection For M2E1 (Jp4)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 7.18.4. Integrated CNVi Selection for M2E1 (JP4) The 2.0 mm pitch "Integrated CNVi Selection for M2E1" jumper (JP4) can be used to select whether or not to enable CNVi device in M.2 Key E slot. Figure 34: Integrated CNVi Selection JP4 Table 40: Pin Assignment JP4 Jumper 1 Position...

  • Page 62: Clear Cmos Selection (Jp7)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Table 42: Pin Assignment JP6 Jumper 1 Position Description Pin 1-2 Pin 2-3 ATX Mode AT Mode “X’’ = Jumper set (short) and ‘‘-’’ = jumper not set (open) 7.18.7. Clear CMOS Selection (JP7) The 2.0 mm pitch "Clear COMS Selection"...

  • Page 63: Mfg Mode Selection (Jp10)

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Table 44: Pin Assignment JP9 Jumper 1 Position Description Pin 1-2 Pin 2-3 +5 V +5 VSB “X’’ = Jumper set (short) and ‘‘-’’ = jumper not set (open) 7.18.9. MFG Mode Selection (JP10) The 2.0 mm pitch "MFG Mode Selection"...

  • Page 64: 8/ Bios

    3.5"-SBC-WLU - User Guide, Rev. 1.8 8/ BIOS 8.1. Starting the uEFI BIOS The 3.5"-SBC-WLU is provided with a Kontron-customized, pre-installed and configured version of AMI Aptio® V uEFI BIOS. AMI BIOS firmware is based on the Unified Extensible Firmware Interface (UEFI) specification and the Intel® Platform Innovation Framework for EFI.

  • Page 65: Starting The Uefi Bios

    3.5"-SBC-WLU - User Guide, Rev. 1.8 8.2. Starting the uEFI BIOS The Setup utility features shows six menus in the selection bar at the top of the screen:  Main  Advanced  Power  Boot  Security  Save & Exit The Setup menus are selected via the left and right arrow keys.

  • Page 66: Figure 40: Bios Main Menu Screen System Data And Time

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 40: BIOS Main Menu Screen System Data and Time BIOS SETUP UTILITY Main Advanc Power Boot Security Save & Exit Product Information Product Name 3.5-SBC-WLU BIOS Version WHLUVEX.001 (x64) BIOS Build Date 01/08/2020 ME Firmware SKU Corporate SKU ME Firmware Version...

  • Page 67: Advanced Setup Menu

    3.5"-SBC-WLU - User Guide, Rev. 1.8 8.2.2. Advanced Setup Menu The Advanced setup menu provides sub-screens and functions for advanced configurations. The following sub- screen functions are included in the menu:  LAN & Audio Configuration  Display Configuration  Super IO Configuration ...

  • Page 68: Figure 41: Bios Advanced Menu

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 41: BIOS Advanced Menu BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Onboard LAN1 Controller [Enabled] Onboard LAN2 Controller [Enabled] Load I219 UNDI Driver [Disabled] Load I210 UNDI Driver [Disabled] Audio Controller [Enabled] >...

  • Page 69: Figure 42: Bios Advanced Menu - Display Configuration

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 42: BIOS Advanced Menu - Display Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Display Configuration Primary Display [IGFX] Internal Graphics* [Enabled] Aperture Size [256MB] DVMT Pre-Allocated [32M] DVMT Total Gfx Mem [256MB] →...
  • Page 70 3.5"-SBC-WLU - User Guide, Rev. 1.8 Feature Option Description [1366x768 1CH], [1366x768 2CH], [1600x1200 2CH], [1920x1080 2CH] LVDS Panel Color [18Bit], [24Bit] LVDS panel color depth by appropriate setup item. Depth PWM Backlight [By External], [By CN21 LVDS Backlight Power Wafer Pin 2 output control Control Internal] [By External]: Control by external HW circuit.

  • Page 71: Figure 43: Bios Advanced Menu - Super Io Configuration

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 43: BIOS Advanced Menu - Super IO Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Super IO Configuration > Serial Port 1 Configuration → ←: Select Screen > Serial Port 2 Configuration ↑...

  • Page 72: Figure 45: Bios Advanced Menu - Super Io Configuration - Serial Port 2 Configuration

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Feature Option Description IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] Serial Port 1 Type [RS232], [RS422], Select an appropriate type for Serial Port 1. [RS485] RS485 Duplex Mode [Half Duplex], [Full Select an appropriate RS485 Duplex Mode. Duplex] RS485 Auto Flow [Disabled], [Enabled]...
  • Page 73 3.5"-SBC-WLU - User Guide, Rev. 1.8 Feature Option Description RS485 Auto Flow [Disabled], [Enabled] Select whether to enable or disable RS485 Auto Flow Control. Control RS485/422 Receiver [Disabled], [Enabled] Select whether to enable or disable RS485/422 Receiver Termination Termination. www.kontron.com // 73...

  • Page 74: Figure 46: Bios Advanced Menu - Cpu Chipset Configuration

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 46: BIOS Advanced Menu - CPU Chipset Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit CPU Chipset Configuration EIST [Enabled] → ←: Select Screen Turbo Mode [Enabled] ↑ ↓: Select Item Hyper-Threading [Enabled] Enter: Select...

  • Page 75: Figure 47: Bios Advanced Menu - Nvme Configuration

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 47: BIOS Advanced Menu - NVMe Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit NVMe Configuration No NVMe Device Found → ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.

  • Page 76: Figure 48: Bios Advanced Menu - Sata Configuration

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 48: BIOS Advanced Menu - SATA Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit SATA Configuration SATA Controller(s) [Enabled] → ←: Select Screen SATA Mode Selection [AHCI] ↑ ↓: Select Item Enter: Select Serial ATA Port 1 Empty...

  • Page 77: Figure 49: Bios Advanced Menu - Usb Configuration

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 49: BIOS Advanced Menu - USB Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit USB Configuration USB Devices: → ←: Select Screen 1 Keyboard ↑ ↓: Select Item Enter: Select Legacy USB Support [Enabled] +/-: Change Opt.

  • Page 78: Figure 50: Bios Advanced Menu - Amt Configuration

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 50: BIOS Advanced Menu - AMT Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit AMT Configuration AMT BIOS Features [Enabled] → ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.

  • Page 79: Figure 51: Bios Advanced Menu - Trusted Computing

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 51: BIOS Advanced Menu - Trusted Computing BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Configuration Security Device Support [Disabled] No Security Device Found → ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.

  • Page 80: Figure 52: Bios Advanced Menu - H/W Monitor

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 52: BIOS Advanced Menu - H/W Monitor BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit PC Health Status > Smart FAN Configuration CPU Temperature : +44 C Memory Temperature : +30 C System Temperature : +35 C CPU Fan Speed...
  • Page 81 3.5"-SBC-WLU - User Guide, Rev. 1.8 Feature Option Description CPU FAN Setting [Manual], [Smart] Switch the CPU FAN control mode. www.kontron.com // 81...

  • Page 82: Figure 54: Bios Advanced Menu - Network Stack

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Figure 54: BIOS Advanced Menu - Network Stack BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Network Stack [Disabled] Ipv4 PXE Support* [Disabled] Ipv4 HTTP Support* [Disabled] → ←: Select Screen Ipv6 PXE Support* [Disabled] ↑...

  • Page 83: Power Setup Menu

    3.5"-SBC-WLU - User Guide, Rev. 1.8 8.2.3. Power Setup Menu The Power setup menu provides functions and a sub-screen for power configurations. The following sub-screen function is included in the menu:  WatchDog Timer Configuration Figure 55: BIOS Power Setup Menu BIOS SETUP UTILITY Main Advanced...
  • Page 84 3.5"-SBC-WLU - User Guide, Rev. 1.8 Main Advanced Power Boot Security Save & Exit WatchDog Timer Configuration WDT Function [Disabled] → ←: Select Screen WDT Count Mode* [Second] ↑ ↓: Select Item WDT Timer* Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 85: Boot Setup Menu

    3.5"-SBC-WLU - User Guide, Rev. 1.8 8.2.4. Boot Setup Menu The boot setup menu lists the for boot device priority order, that is generated dynamically. Figure 57: BIOS Boot Setup Menu BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Boot Configuration Full Screen LOGO Display [Disabled]...

  • Page 86: Security Setup Menu

    3.5"-SBC-WLU - User Guide, Rev. 1.8 8.2.5. Security Setup Menu The Security setup menu provides information about the passwords and functions for specifying the security settings. The passwords are case-sensitive. The 3.5"-SBC-WLU provides no factory-set passwords. If there is already a password installed, the system asks for this first. To clear a password, simply enter nothing and acknowledge by pressing <RETURN>.
  • Page 87 3.5"-SBC-WLU - User Guide, Rev. 1.8 8.2.5.1. Remember the password It is highly recommended to keep a record of all passwords in a safe place. Forgotten passwords results in being locked out of the system. If the system cannot be booted because the User Password or the Supervisor Password are not know, contact Kontron Support for further assistance.

  • Page 88: Save & Exit Setup Menu

    3.5"-SBC-WLU - User Guide, Rev. 1.8 8.2.6. Save & Exit Setup Menu The exit setup menu provides functions for handling changes made to the UEFI BIOS settings and the exiting of the setup program. Figure 59: BIOS Save & Exit Setup Menu BIOS SETUP UTILITY Main Advanced...

  • Page 89: Appendix A: List Of Acronyms

    3.5"-SBC-WLU - User Guide, Rev. 1.8 Appendix A: List of Acronyms The following table does not contain the complete acronyms used in signal names, signal type definitions or similar. A description of the signals is included in the I/O Connector and Internal connector chapters within this user guide. Table 48: List of Acronyms Two-Dimensional Real-Time Clock...

  • Page 90: About Kontron

    3.5"-SBC-WLU - - User Guide, Rev. 1.8 About Kontron Kontron is a global leader in IoT / Embedded Computing Technology (ECT) and offers individual solutions in the areas of Internet of Things (IoT) and Industry 4.0 through a combined portfolio of hardware, software and services.

This manual is also suitable for:

Kontron sbc-wlu-4305ueKontron sbc-wlu-i3-8145ueKontron sbc-wlu-i5-8365ueKontron sbc-wlu-i7-8665ue

Table of Contents