Download Print this page

Celsius EVAP 5000 User Manual

Download this manual

USER GUIDE

EVAP 5000

Need help?

Do you have a question about the EVAP 5000 and is the answer not in the manual?

Page 1 USER GUIDE EVAP 5000...
Page 2 WARNINGS The COMCOOL 50 is a portable high efficiency evaporative cooler. It is connected to a 13 Amp.1P 230Vac. 50Hz power supply and comes fitted with a fused uk moulded plug. It has a nominal running current of 2A. It is recommended that the supply to the machine should be protected by a 30mA RCD.
Page 3 Set up and operation: • The unit must be sited on a firm level surface and the castor brakes applied. • The unit should be situated with the rear of the machine clear of obstructions. A minimum clearance of 900mm is recommended. •...
Page 7: Troubleshooting Guide
TROUBLE SHOOTING GUIDE...
Page 8 CC50 maintenance: WARNING! RISK OF ELECTRIC SHOCK. DISCONNECT THE POWER SUPPLY BEFORE REMOVING ANY PANELS OR PERFORMING ANY MAINTENANCE. RISK OF INJURY OR DEATH! Removal and cleaning of the cooling pad: For efficient operation of the CC50 it is important to regularly clean the cooling pad to prevent the build up air borne particles on the pad.
Page 9 Accessing the submersible pump: • Always ensure the tank is empty before attempting to access the submersible pump. • The pump is located inside the water tank. • Remove the machines front access panel. • Remove the screw cap from the front of the water tank. •...