ASROCK Q670M vPRO User Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. Q670M vPRO
  6. User manual
ASROCK Q670M vPRO User Manual

ASROCK Q670M vPRO User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Q670M vPRO and is the answer not in the manual?

Questions and answers

Related Manuals for ASROCK Q670M vPRO

Summary of Contents for ASROCK Q670M vPRO

  • Page 2 Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...

  • Page 3: Table Of Contents

    Contents Chapter 1 Introduction Package Contents Specifications Motherboard Layout I/O Panel Block Diagram Chapter 2 Installation Installing the CPU Installing the CPU Fan and Heatsink Installing Memory Modules (DIMM) Connecting the Front Panel Header Installing the I/O Panel Shield Installing the Motherboard Installing SATA Drives Installing a Graphics Card Connecting Peripheral Devices...
  • Page 4 2.15 M.2 SSD Module Installation Guide (M2_1)

  • Page 5: Chapter 1 Introduction

    If you require technical support related to this mother- board, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.

  • Page 6: Specifications

    Processors support DDR5 non-ECC, un-buffered memory up to 4800* • Max. capacity of system memory: 192GB • Supports Intel® Extreme Memory Profile (XMP) 3.0 * Please refer to Memory Support List on ASRock's website for more information. (http://www.asrock.com/) Expansion CPU: Slot • 1 x PCIe 4.0 x16 Slot (PCIEX16), supports x16 mode*...
  • Page 7 Q670M vPro Graphics • Intel® UHD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated. • Intel® X Graphics Architecture (Gen 12) • 1 x HDMI 2.1 TMDS Compatible, supports HDCP 2.3 and max.
  • Page 8 RAID • Supports RAID 0, RAID 1, RAID 5 and RAID 10 for SATA storage devices • Supports RAID 0 and RAID 1 for M.2 NVMe storage devices* * Requires additional M.2 NVMe expansion cards to support RAID 0 and RAID 1 • SPI TPM 2.0 IC Connector • 1 x Chassis Intrusion Header...
  • Page 9 Q670M vPro * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system.

  • Page 10: Motherboard Layout

    1.3 Motherboard Layout CPU_FAN1 CPU_FAN2/WP ATX12V1 USB 2.0 Ports (USBR1) USB 2.0 Ports (USBR2) CHA_FAN1/WP Top: USB 3.2 Gen2 Port RJ-45 (USB) PCIEX16 Intel CMOS Battery Q670 RoHS PCIEX1_1 PCIEX1_2 AUDIO SPI TPM 2.0 SATA3_0 SATA3_1 CODEC FUSB1 F_PANEL F_AUDIO CHA_FAN2/WP SPEAKER2 BIOS...
  • Page 11 Q670M vPro No. Description ATX 12V Power Connector (ATX12V1) 2 x 288-pin DDR5 DIMM Slots (DDR5_A1, DDR5_B1) 2 x 288-pin DDR5 DIMM Slots (DDR5_A2, DDR5_B2) CPU Fan Connector (CPU_FAN1) CPU/Water Pump Fan Connector (CPU_FAN2/WP) ATX Power Connector (ATXPWR1) Front Panel Type C USB 3.2 Gen2x2 Header (FUSB32C) USB 3.2 Gen1 Header (FUSB32)

  • Page 12: I/O Panel

    1.4 I/O Panel No. Description No. Description 2.5G LAN RJ-45 Port* USB 2.0 Ports (USBR2) Line In (Light Blue)** USB 2.0 Ports (USBR1) Front Speaker (Lime)** HDMI Port Microphone (Pink)** DisplayPort 1.4 USB 3.2 Gen2 Type-APorts (USB)
  • Page 13 Q670M vPro * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port Activity / Link LED Speed LED Status Description Status Description No Link...

  • Page 14: Block Diagram

    1.5 Block Diagram...

  • Page 15: Chapter 2 Installation

    Q670M vPro Chapter 2 Installation This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.

  • Page 16: Installing The Cpu

    2.1 Installing the CPU 1. Before you insert the 1700-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 17 Q670M vPro...
  • Page 18 Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.

  • Page 19: Installing The Cpu Fan And Heatsink

    Q670M vPro 2.2 Installing the CPU Fan and Heatsink...

  • Page 20: Installing Memory Modules (Dimm)

    2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR5 (Double Data Rate 5) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR5 DIMM pairs. 2.
  • Page 21 Q670M vPro...

  • Page 22: Connecting The Front Panel Header

    2.4 Connecting the Front Panel Header Front Panel Wires System Panel Header Power SW (-) RESET SW (+) Power SW (+) RESET SW (-) Power LED (-) HDD LED (-) Power LED (+) HDD LED (+) PANEL1...

  • Page 23: Installing The I/O Panel Shield

    Q670M vPro 2.5 Installing the I/O Panel Shield...

  • Page 24: Installing The Motherboard

    2.6 Installing the Motherboard...

  • Page 25: Installing Sata Drives

    Q670M vPro 2.7 Installing SATA Drives Optical Drive SATA Drive SATA Data Cable...
  • Page 26 SATA Power Connector SATA Data Connector...

  • Page 27: Installing A Graphics Card

    Q670M vPro 2.8 Installing a Graphics Card CLICK!
  • Page 28 Expansion Slots (PCIe Slots) There are 3 PCIe slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

  • Page 29: Connecting Peripheral Devices

    Q670M vPro 2.9 Connecting Peripheral Devices...

  • Page 30: Connecting The Power Connectors

    2.10 Connecting the Power Connectors...

  • Page 31: Power On

    Q670M vPro 2.11 Power On...

  • Page 32: Jumpers Setup

    2.12 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. Clear CMOS Jumper (CLRMOS1) (see p.6, No. 17 ) CLRMOS1 allows you to clear the data in CMOS.

  • Page 33: Onboard Headers And Connectors

    Q670M vPro 2.13 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header (9-pin F_PANEL) (see p.6, No.
  • Page 34 Serial ATA3 Connectors Vertical: (SATA3_0) (see p.6, No. 13) (SATA3_1) (see p.6, No. 10) (SATA3_2) (see p.6, No. 12) (SATA3_3) (see p.6, No. 11) These four SATA3 connectors support SATA data cables for internal storage devices with up to 6.0 Gb/s data transfer rate. SATA3_0 SATA3_1 SATA3_2 SATA3_3 USB 2.0 Header...
  • Page 35 Q670M vPro USB 3.2 Gen1 Header (19-pin FUSB32) (see p.6, No. 8) There is one USB 3.2 Gen1 header on this motherboard. This USB 3.2 Gen1 header can support two ports. FUSB32 Vbus Vbus Vbus IntA_PB_SSRX- IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX-...
  • Page 36 Front Panel Audio Header (9-pin F_AUDIO) (see p.6, No. 20) This header is for connecting audio devices to the front audio panel. F_AUDIO PRESENCE# MIC_RET OUT_RET OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup- port HDA to function correctly.
  • Page 37 Q670M vPro Chassis Speaker Header (4-pin SPEAKER1) (see p.6, No. 15) Please connect the chassis speaker to this header. 4 pin 3W Stereo Speaker Header (4-pin SPEAKER2) (see p.6, No. 19) Please connect the chassis speaker to this header. SPEAKER2...
  • Page 38 Chassis/Water Pump Fan Connectors (4-pin CHA_FAN1/WP) (see p.6, No. 21) (4-pin CHA_FAN2/WP) (see p.6, No. 18) This motherboard provides two 4-Pin water cooling chassis fan connectors. If you plan to connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3. CHA_FAN1/WP FAN_SPEED_CONTROL CHA_FAN_SPEED...
  • Page 39 Q670M vPro CPU Fan Connector (4-pin CPU_FAN1) (see p.6, No. 4) This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3. CPU_FAN1 +12V CPU_F AN_SPEED...
  • Page 40 ATX Power Connector (24-pin ATXPWR1) (see p.6, No. 6) This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13. ATXPWR1 ATX 12V Power Connector (8-pin ATX12V1) (see p.6, No. 1) This motherboard provides a 8-pin ATX 12V power connector.
  • Page 41 Q670M vPro Chassis Intrusion Header (2-pin CASE_OPEN) (see p.6, No. 16) This motherboard supports CASE OPEN detection feature that detects if the chassis cove has been removed. This feature requires a chassis with chassis intrusion detection design. CASE_OPEN Signal...

  • Page 42: Wifi/Bt Pcie Wifi Module And Intel® Cnvi (Integrated Wifi/Bt) Installation Guide

    2.14 M.2 WiFi/BT PCIe WiFi Module and Intel® CNVi (Integrated WiFi/BT) Installation Guide The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (Key E) supports type 2230 WiFi/BT PCIe WiFi module and Intel®...
  • Page 43 Q670M vPro Step 3 Remove the screw and save it for later use. Step 4 Gently insert the WiFi/BT PCIe WiFi module or Intel® CNVi (Integrated WiFi/BT) into the M.2 slot. Please be aware that the module only fits in one orientation.
  • Page 44 2.15 M.2 SSD Module Installation Guide (M2_1) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Socket (M2_1, Key M) supports type 2260/2280 PCIe Gen4x4 (64 Gb/s) mode. Installing the M.2 SSD Module Step 1 Prepare a M.2 SSD module.
  • Page 45 Q670M vPro Step 3 The screw is placed at the nut location B by default. Remove it from the standoff and save it for later use. Step 4 Move the standoff based on the module type and length. The standoff is placed at the nut location B by default.
  • Page 46 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw NUT2 NUT1 as this might damage the module. For the latest updates of M.2 SSD module support list, please visit our website for details: http://www.asrock.com...
  • Page 47 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Page 48 INTEL END USER SOFTWARE LICENSE AGREEMENT IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software only in its unmodified and binary form, (with the accompanying documentation, the “Software”) for Licensee’s personal use only, and not commercial use, in connection with Intel-based products for which the Software has been provided, subject to the following conditions: (a) Licensee may not disclose, distribute or transfer any part of the Software, and You agree...
  • Page 49 U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide the Software to the U.S.
  • Page 50 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 51 ASRock follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASRock product is in line with global environmental regulations. In addition, ASRock disclose the relevant information based on regulation requirements.
  • Page 52 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)

Table of Contents