Advertisement
Quick Links
Advertisement
Related Manuals for Zumtobel HAP TAG Quuppa QT1-1
Summary of Contents for Zumtobel HAP TAG Quuppa QT1-1
- Page 1 HAP Tags Mounting Guide User Guide...
- Page 2 Legal information Copyright Copyright © Zumtobel Lighting GmbH All rights reserved. Manufacturer Zumtobel Lighting GmbH Schweizerstrasse 30 6850 Dornbirn AUSTRIA Tel. +43-(0)5572-390-0 Fax +43-(0)5572-22826 info@zumtobel.info www.zumtobel.com Document number HAP Tags Mounting Guide, User Guide 1.0 | 06.2023 | en...
- Page 3 Table of contents Overview ............................4 QT1-1 Tag Details ........................... 5 Mounting Guide ..........................7 HAP Tags Mounting Guide, User Guide 1.0 | 06.2023 | en...
- Page 4 In this document Zumtobel provides only generic recommendations of how to mount the tag in different sce- narios, and it’s left to the customer to decide how to best mount the tag. Therefore Zumtobel takes no re- sponsibility of how the tag is installed on-site.
- Page 5 QT1-1 Tag Details QT1-1 Tag Details 4 mounting holes (1) Button (2) Red LED (3) Waterproof casing 2.4 GHz radio SoC Accelerometer Preprogrammed with Quuppa Firmware QT1-1 dimensions Dimensions (mm), front view Dimensions (mm), side view Waterproof casing Quuppa QT1-1 has IP protection class IP67. It is protected against water up to 1 meter of depth for maxi- mum of 30 minutes.
- Page 6 QT1-1 Tag Details Warning Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries accord- ing to the instructions. Technical Specifications Item Description ⌀: 39 mm, h: 9 mm Model number QT1-1 Dimensions Weight 10 g IP protection class IP 67 Operating temp.
- Page 7 Remember that Locators should have a vision of the tag. In this way, the tag shouldn't be mounted under a metal plate or in a box. • Zumtobel recommends flat mounting on top or vertical mounting on the side assets, as long as the assets are not stored next to each other. •...
- Page 8 Mounting Guide For Baskets • For Industrial use cases, the previously mentioned recommendations also applies, but of course, tools and assets tracked might differ and some adjustments might be necessary. • For example, for handle tools a good place might be the end of the handling as it can be seen in the image below: HAP Tags Mounting Guide, User Guide 1.0 | 06.2023 | en...
- Page 9 EN 06/2023 © Zumtobel Lighting GmbH...
Need help?
Do you have a question about the HAP TAG Quuppa QT1-1 and is the answer not in the manual?
Questions and answers