Subscribe to Our Youtube Channel
Related Manuals for andover SPINDECK 2
Summary of Contents for andover SPINDECK 2
- Page 1 Product Manual SPINDECK 2 BEL T-DRIVE TURNT ABLE WITH AUTO RETURN www.andoveraudio.com Page 1...
- Page 2 Page 2...
-
Page 3: Table Of Contents
Table of Contents Introduction/Safety note............4 Basic Features and Controls............. 5 Connect SpinDeck 2 to your Amplifier............6 To Set Up your SpinDeck 2/Basic Operation............7,8 Useful Tips............9 In Case of Difficulty............10 Customizing Your Vinyl Experience............11 60-Day Guarantee/2-Year Warranty/Service............12 Technical Specifications/Important Packing Instructions............13... -
Page 4: Introduction/Safety Note
We know you are anxious to get spinning, but please take a few moments to read through this booklet to get the most enjoyment from your SpinDeck 2. If you have any questions not covered here please contact Andover Audio support at www. -
Page 5: Basic Features And Controls
Basic Features and Controls RUBBER PLATTER MAT COUNTERWEIGHT CUEING LEVER TONEARM LATCH PLATTER TONEARM PHONO CARTRIDGE SPEED SELECTOR STYLUS STOP Speed Selector - Choose the playing speed or switch to STOP to pause rotation. When the arm is at rest, the power will be turned off, so this switch may be left in your preferred speed when not being used. -
Page 6: Connect Spindeck 2 To Your Amplifier
The jack with the red insert should be attached to the RIGHT channel, and the plug with the white insert is the LEFT channel. A wire from the Ground Screw on SpinDeck 2 should be attached to the similar ground screw on Spinbase or other compatible amplifier. If your amplifier does not have a ground screw, slip it under one of the screws which holds the amplifier chassis together and tighten it securely. - Page 7 To Set-up your SpinDeck 2 Adjust the Tonearm Tracking Force The most important setup step is to balance the tonearm and set tracking force. We recommend doing this first so that there are fewer components, such as the platter, in the way to interfere.
-
Page 8: To Set Up Your Spindeck 2/Basic Operation
The turntable is supplied with a power adapter. Plug the power adapter into the DC power jack at the rear of SpinDeck 2 first, then plug the adapter into your AC power. Press the power switch on the rear panel to energize the internal circuitry. It is unnecessary to switch the power off under normal use, as the power will be turned off when the tonearm is at rest. -
Page 9: Useful Tips
Useful Tips SpinDeck 2 should be positioned on a low-resonance surface such as wood or multiple layer ply board to avoid structural vibrations disturbing replay. The Andover SpinSystem components have been specially designed to provide a stable, solid support that perfectly compliments SpinDeck 2. -
Page 10: In Case Of Difficulty
• The unit is connected to a phono input designed for a magnetic cartridge and the PHONO EQ switch is set to ON. Change the setting to THRU if SpinDeck 2 is connected to an input labeled Phono. Stong hum on phono input: •... -
Page 11: Customizing Your Vinyl Experience
There are many other choices including felt, vinyl, acrylic, or other materials that you may wish to try.The Andover Puregrain Cork mat provides great resonance damping along with antistatic properties that make it a worthwhile upgrade. -
Page 12: 60-Day Guarantee/2-Year Warranty/Service
SpinDeck 2. If you must return your SpinDeck 2 for any reason, it must be safely packed and shipped in its original carton and packing material. Damage that is the result of improper packaging is not covered by the warranty. -
Page 13: Technical Specifications/Important Packing Instructions
There is a video in the support section of our website demonstrating the proper way to repackage your SpinDeck 2. In the event that you must ship your SpinDeck 2 for service or return, please heed these packing “must do’s”: 1. - Page 14 Andover Audio, L.L.C. 15 High Street North Andover, Massachusetts 01845 www.andoveraudio.com Andover is a registered trademark of Andover Audio L.L.C. Audio Technica is a registered trademark of Audio Technica Corporation. Page 3 P/N 2210RB...
Need help?
Do you have a question about the SPINDECK 2 and is the answer not in the manual?
Questions and answers