Hotpoint H3BL626BUK Daily Reference Manual
  1. Manuals
  2. Brands
  3. Hotpoint Manuals
  4. Dishwasher
  5. H3BL626BUK
  6. Daily reference manual
Hotpoint H3BL626BUK Daily Reference Manual

Hotpoint H3BL626BUK Daily Reference Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
DAILY REFERENCE
GUIDE
THANK YOU FOR BUYING A HOTPOINT PRODUCT.
In order to receive a more complete assistance, please
register your appliance on: www.hotpoint.eu/register
Before using the appliance carefully read Safety Instructions guide.
PRODUCT DESCRIPTION
APPLIANCE
7
8
9
11
Service:
0000 000 00000
12
CONTROL PANEL
1
1.
On-Off/Reset button with indicator light
2.
Program selection button with indicator light
3.
Half Load button with indicator light
4.
Rinse Aid refill indicator light
5.
Salt refill indicator light
2
3
4
5
You can download the Safety Instructions and the User
Manual, by visiting our website docs.hotpoint.eu
and following the Instructions on the back of this
booklet.
1
1.
Upper rack
2.
Foldable flaps
2
3.
Upper rack height adjuster
4.
Upper spray arm
5.
Lower rack
3
6.
Cutlery basket
7.
Lower spray arm
4
8.
Filter Assembly
5
9.
Salt reservoir
6
10. Detergent and Rinse Aid dispensers
11. Rating plate
10
12. Control panel
6
7
8
6.
Program indicator lights
7.
Delay indicator light
8.
Delay button with indicator light
9.
Tablet (Tab) button with indicator light
10. Start/Pause button with indicator light / Drain out
9
10
EN
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H3BL626BUK and is the answer not in the manual?

Questions and answers

Brian Jackson
August 1, 2025

Can I use the dishwasher without filling the salt reservoir ?

0

Related Manuals for Hotpoint H3BL626BUK

Summary of Contents for Hotpoint H3BL626BUK

  • Page 1 DAILY REFERENCE GUIDE THANK YOU FOR BUYING A HOTPOINT PRODUCT. You can download the Safety Instructions and the User In order to receive a more complete assistance, please Manual, by visiting our website docs.hotpoint.eu register your appliance on: www.hotpoint.eu/register and following the Instructions on the back of this booklet.
  • Page 2 FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE FILLING THE RINSE AID DISPENSER After installation, remove the stoppers from the racks and the retaining Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control elastic elements from the upper rack.

  • Page 3: Programs Table

    PROGRAMS TABLE Duration Water Energy Available of wash Program consumption consumption options program (litres/cycle) (kWh/cycle) (h:min) 1. Eco 50° 3:35 0.95 2. Intensive 65° 2:40 18.0 1.60 3. Mixed 55° 2:15 16.0 1.40 4. Rapid 28’ 50° 0:28 0.50 5. Soak 0:12 0.01 ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
  • Page 4 OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. TABLET (Tab) HALF LOAD This setting allows you to optimize the performance...

  • Page 5: Loading The Racks

    LOADING THE RACKS UPPER RACK LOWER RACK Load delicate and light dishes: For pots, lids, plates, salad glasses, cups, saucers, low salad bowls, cutlery etc. Large plates bowls. and lids should ideally be placed at the sides to avoid interferences with the spray arm.

  • Page 6: Daily Use

    DAILY USE 1. CHECK WATER CONNECTION The machine will switch off automatically during certain extended periods of inactivity, in order to minimise electricity consumption. Check that the dishwasher is connected to the water supply and that the tap is open. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount 2.

  • Page 7: Care And Maintenance

    CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the filter assembly so that the filters do not clog and that On occasions, food residue may become encrusted onto the spray arms the waste water flows away correctly. and block the holes used to spray the water.

  • Page 8: Troubleshooting

    Policies, standard documentation, ordering of spare parts and additional product infor- mation can be found by: • Visiting our website docs.hotpoint.eu and parts-selfservice.whirlpool.com • Using QR Code • Alternatively, contact our After-sales Service (See phone number in the warranty booklet).

Table of Contents