Advertisement
Quick Links
Advertisement
Related Manuals for Friday Furniture CS48
Summary of Contents for Friday Furniture CS48
- Page 1 Clamshell Desk CS48 Quick start guide Rev 1.1 © 2023 Friday Furniture LLC...
- Page 2 Questions or Comments? Contact email: hello@friday.furniture Rev 1.1 © 2023 Friday Furniture LLC...
- Page 3 Clamshell Desk at a glance Magnetic latches 27” Monitor Ring light controller USB-A & USB-C ports Power outlet Power strip cover panel LED ring light Rev 1.1 © 2023 Friday Furniture LLC...
- Page 4 Weight limit - Do not exceed 50 lbs of weight on the desk top surface when unfolded. Do not allow children to play on or around desk. Do not exceed 250 lbs total weight of Clamshell Desk and accessories. Max load 50 lbs Rev 1.1 © 2023 Friday Furniture LLC...
- Page 5 Warnings Electrical load - Do not exceed 1200W total electrical load on Clamshell Desk power system. Rev 1.1 © 2023 Friday Furniture LLC...
-
Page 6: Installation
Required tools: 1. Electric drill 2. 5/32” Drill bit 3. T10 and T25 (Torx) driver bits 4. 7/16” Wrench 5. Spirit level 6. Tape measure 7. Pencil Recommended tools: 1. Electronic stud finder Rev 1.1 © 2023 Friday Furniture LLC... - Page 7 Installation Included hardware Part Count Reference image (not to scale) ¼” x 2.5” Lag bolt #8 x 1.25” Deck screw Birch security plate Aluminum mounting bracket C13 Power cord Rev 1.1 © 2023 Friday Furniture LLC...
- Page 8 90 degree angle. Measure from the floor to the underside of your forearm. This is your ideal desk height. Rev 1.1 © 2023 Friday Furniture LLC...
- Page 9 (determined in Step 1) + 18.75” (476mm) from the floor. This is the location of your first pilot hole for the mounting bracket. Pilot hole height = ideal desk height + 18.75” Rev 1.1 © 2023 Friday Furniture LLC...
- Page 10 ¼” lag screws. In total your mounting bracket must be attached to three separate studs. Tighten the lag screws all the way. Rev 1.1 © 2023 Friday Furniture LLC...
- Page 11 If studs are not conveniently located for attachment, appropriately sized drywall anchors can be used. Rev 1.1 © 2023 Friday Furniture LLC...
- Page 12 Monitor arm adjustment slots Pull any slack in the cable through the hole and (slots used depend on monitor coil behind the corkboard. arm selected) Rev 1.1 © 2023 Friday Furniture LLC...
- Page 13 Use your spirit level to confirm the desk is level and seated correctly. Gently pull the top edge of the desktop away from the wall to open the desk. Rev 1.1 © 2023 Friday Furniture LLC...
- Page 14 The port on the underside of the desk can be bypassed by plugging the power strip behind the corkboard directly into the power outlet on the wall. Rev 1.1 © 2023 Friday Furniture LLC...
- Page 15 Your desk is now installed and ready to go! Plug it in with the provided C13 power cord. Drive #8 screw through this hole and into the security plate Rev 1.1 © 2023 Friday Furniture LLC...
- Page 16 Tap once to turn the ring light on and off. While the light is on, touch and hold the black metal pad to adjust brightness. Rev 1.1 © 2023 Friday Furniture LLC...
- Page 17 Avoid contact with pacemakers or other devices sensitive to magnetism. Use a firm grip and take care when opening the desk. Do not allow the desktop to drop uncontrollably. Rev 1.1 © 2023 Friday Furniture LLC...
- Page 18 Using your desk Cleaning and care Disconnect C13 power cord and wipe wood surfaces with a damp cloth. Rev 1.1 © 2023 Friday Furniture LLC...
Need help?
Do you have a question about the CS48 and is the answer not in the manual?
Questions and answers